From 0916b5f9072f7bd1b7b045ceb07758f9dc097ac2 Mon Sep 17 00:00:00 2001 From: Vincent Peyruqueou Date: Mon, 27 Mar 2023 11:46:59 +0200 Subject: Add sources of PCRE and Microsoft Visual Studio solutions to compile the lib --- pcre/pcre_dfa_exec.c | 3676 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 3676 insertions(+) create mode 100644 pcre/pcre_dfa_exec.c (limited to 'pcre/pcre_dfa_exec.c') diff --git a/pcre/pcre_dfa_exec.c b/pcre/pcre_dfa_exec.c new file mode 100644 index 0000000..f333381 --- /dev/null +++ b/pcre/pcre_dfa_exec.c @@ -0,0 +1,3676 @@ +/************************************************* +* Perl-Compatible Regular Expressions * +*************************************************/ + +/* PCRE is a library of functions to support regular expressions whose syntax +and semantics are as close as possible to those of the Perl 5 language (but see +below for why this module is different). + + Written by Philip Hazel + Copyright (c) 1997-2017 University of Cambridge + +----------------------------------------------------------------------------- +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + * Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + * Neither the name of the University of Cambridge nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +----------------------------------------------------------------------------- +*/ + +/* This module contains the external function pcre_dfa_exec(), which is an +alternative matching function that uses a sort of DFA algorithm (not a true +FSM). This is NOT Perl-compatible, but it has advantages in certain +applications. */ + + +/* NOTE ABOUT PERFORMANCE: A user of this function sent some code that improved +the performance of his patterns greatly. I could not use it as it stood, as it +was not thread safe, and made assumptions about pattern sizes. Also, it caused +test 7 to loop, and test 9 to crash with a segfault. + +The issue is the check for duplicate states, which is done by a simple linear +search up the state list. (Grep for "duplicate" below to find the code.) For +many patterns, there will never be many states active at one time, so a simple +linear search is fine. In patterns that have many active states, it might be a +bottleneck. The suggested code used an indexing scheme to remember which states +had previously been used for each character, and avoided the linear search when +it knew there was no chance of a duplicate. This was implemented when adding +states to the state lists. + +I wrote some thread-safe, not-limited code to try something similar at the time +of checking for duplicates (instead of when adding states), using index vectors +on the stack. It did give a 13% improvement with one specially constructed +pattern for certain subject strings, but on other strings and on many of the +simpler patterns in the test suite it did worse. The major problem, I think, +was the extra time to initialize the index. This had to be done for each call +of internal_dfa_exec(). (The supplied patch used a static vector, initialized +only once - I suspect this was the cause of the problems with the tests.) + +Overall, I concluded that the gains in some cases did not outweigh the losses +in others, so I abandoned this code. */ + + + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#define NLBLOCK md /* Block containing newline information */ +#define PSSTART start_subject /* Field containing processed string start */ +#define PSEND end_subject /* Field containing processed string end */ + +#include "pcre_internal.h" + + +/* For use to indent debugging output */ + +#define SP " " + + +/************************************************* +* Code parameters and static tables * +*************************************************/ + +/* These are offsets that are used to turn the OP_TYPESTAR and friends opcodes +into others, under special conditions. A gap of 20 between the blocks should be +enough. The resulting opcodes don't have to be less than 256 because they are +never stored, so we push them well clear of the normal opcodes. */ + +#define OP_PROP_EXTRA 300 +#define OP_EXTUNI_EXTRA 320 +#define OP_ANYNL_EXTRA 340 +#define OP_HSPACE_EXTRA 360 +#define OP_VSPACE_EXTRA 380 + + +/* This table identifies those opcodes that are followed immediately by a +character that is to be tested in some way. This makes it possible to +centralize the loading of these characters. In the case of Type * etc, the +"character" is the opcode for \D, \d, \S, \s, \W, or \w, which will always be a +small value. Non-zero values in the table are the offsets from the opcode where +the character is to be found. ***NOTE*** If the start of this table is +modified, the three tables that follow must also be modified. */ + +static const pcre_uint8 coptable[] = { + 0, /* End */ + 0, 0, 0, 0, 0, /* \A, \G, \K, \B, \b */ + 0, 0, 0, 0, 0, 0, /* \D, \d, \S, \s, \W, \w */ + 0, 0, 0, /* Any, AllAny, Anybyte */ + 0, 0, /* \P, \p */ + 0, 0, 0, 0, 0, /* \R, \H, \h, \V, \v */ + 0, /* \X */ + 0, 0, 0, 0, 0, 0, /* \Z, \z, $, $M, ^, ^M */ + 1, /* Char */ + 1, /* Chari */ + 1, /* not */ + 1, /* noti */ + /* Positive single-char repeats */ + 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ + 1+IMM2_SIZE, 1+IMM2_SIZE, /* upto, minupto */ + 1+IMM2_SIZE, /* exact */ + 1, 1, 1, 1+IMM2_SIZE, /* *+, ++, ?+, upto+ */ + 1, 1, 1, 1, 1, 1, /* *I, *?I, +I, +?I, ?I, ??I */ + 1+IMM2_SIZE, 1+IMM2_SIZE, /* upto I, minupto I */ + 1+IMM2_SIZE, /* exact I */ + 1, 1, 1, 1+IMM2_SIZE, /* *+I, ++I, ?+I, upto+I */ + /* Negative single-char repeats - only for chars < 256 */ + 1, 1, 1, 1, 1, 1, /* NOT *, *?, +, +?, ?, ?? */ + 1+IMM2_SIZE, 1+IMM2_SIZE, /* NOT upto, minupto */ + 1+IMM2_SIZE, /* NOT exact */ + 1, 1, 1, 1+IMM2_SIZE, /* NOT *+, ++, ?+, upto+ */ + 1, 1, 1, 1, 1, 1, /* NOT *I, *?I, +I, +?I, ?I, ??I */ + 1+IMM2_SIZE, 1+IMM2_SIZE, /* NOT upto I, minupto I */ + 1+IMM2_SIZE, /* NOT exact I */ + 1, 1, 1, 1+IMM2_SIZE, /* NOT *+I, ++I, ?+I, upto+I */ + /* Positive type repeats */ + 1, 1, 1, 1, 1, 1, /* Type *, *?, +, +?, ?, ?? */ + 1+IMM2_SIZE, 1+IMM2_SIZE, /* Type upto, minupto */ + 1+IMM2_SIZE, /* Type exact */ + 1, 1, 1, 1+IMM2_SIZE, /* Type *+, ++, ?+, upto+ */ + /* Character class & ref repeats */ + 0, 0, 0, 0, 0, 0, /* *, *?, +, +?, ?, ?? */ + 0, 0, /* CRRANGE, CRMINRANGE */ + 0, 0, 0, 0, /* Possessive *+, ++, ?+, CRPOSRANGE */ + 0, /* CLASS */ + 0, /* NCLASS */ + 0, /* XCLASS - variable length */ + 0, /* REF */ + 0, /* REFI */ + 0, /* DNREF */ + 0, /* DNREFI */ + 0, /* RECURSE */ + 0, /* CALLOUT */ + 0, /* Alt */ + 0, /* Ket */ + 0, /* KetRmax */ + 0, /* KetRmin */ + 0, /* KetRpos */ + 0, /* Reverse */ + 0, /* Assert */ + 0, /* Assert not */ + 0, /* Assert behind */ + 0, /* Assert behind not */ + 0, 0, /* ONCE, ONCE_NC */ + 0, 0, 0, 0, 0, /* BRA, BRAPOS, CBRA, CBRAPOS, COND */ + 0, 0, 0, 0, 0, /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND */ + 0, 0, /* CREF, DNCREF */ + 0, 0, /* RREF, DNRREF */ + 0, /* DEF */ + 0, 0, 0, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ + 0, 0, 0, /* MARK, PRUNE, PRUNE_ARG */ + 0, 0, 0, 0, /* SKIP, SKIP_ARG, THEN, THEN_ARG */ + 0, 0, 0, 0, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ + 0, 0 /* CLOSE, SKIPZERO */ +}; + +/* This table identifies those opcodes that inspect a character. It is used to +remember the fact that a character could have been inspected when the end of +the subject is reached. ***NOTE*** If the start of this table is modified, the +two tables that follow must also be modified. */ + +static const pcre_uint8 poptable[] = { + 0, /* End */ + 0, 0, 0, 1, 1, /* \A, \G, \K, \B, \b */ + 1, 1, 1, 1, 1, 1, /* \D, \d, \S, \s, \W, \w */ + 1, 1, 1, /* Any, AllAny, Anybyte */ + 1, 1, /* \P, \p */ + 1, 1, 1, 1, 1, /* \R, \H, \h, \V, \v */ + 1, /* \X */ + 0, 0, 0, 0, 0, 0, /* \Z, \z, $, $M, ^, ^M */ + 1, /* Char */ + 1, /* Chari */ + 1, /* not */ + 1, /* noti */ + /* Positive single-char repeats */ + 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ + 1, 1, 1, /* upto, minupto, exact */ + 1, 1, 1, 1, /* *+, ++, ?+, upto+ */ + 1, 1, 1, 1, 1, 1, /* *I, *?I, +I, +?I, ?I, ??I */ + 1, 1, 1, /* upto I, minupto I, exact I */ + 1, 1, 1, 1, /* *+I, ++I, ?+I, upto+I */ + /* Negative single-char repeats - only for chars < 256 */ + 1, 1, 1, 1, 1, 1, /* NOT *, *?, +, +?, ?, ?? */ + 1, 1, 1, /* NOT upto, minupto, exact */ + 1, 1, 1, 1, /* NOT *+, ++, ?+, upto+ */ + 1, 1, 1, 1, 1, 1, /* NOT *I, *?I, +I, +?I, ?I, ??I */ + 1, 1, 1, /* NOT upto I, minupto I, exact I */ + 1, 1, 1, 1, /* NOT *+I, ++I, ?+I, upto+I */ + /* Positive type repeats */ + 1, 1, 1, 1, 1, 1, /* Type *, *?, +, +?, ?, ?? */ + 1, 1, 1, /* Type upto, minupto, exact */ + 1, 1, 1, 1, /* Type *+, ++, ?+, upto+ */ + /* Character class & ref repeats */ + 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ + 1, 1, /* CRRANGE, CRMINRANGE */ + 1, 1, 1, 1, /* Possessive *+, ++, ?+, CRPOSRANGE */ + 1, /* CLASS */ + 1, /* NCLASS */ + 1, /* XCLASS - variable length */ + 0, /* REF */ + 0, /* REFI */ + 0, /* DNREF */ + 0, /* DNREFI */ + 0, /* RECURSE */ + 0, /* CALLOUT */ + 0, /* Alt */ + 0, /* Ket */ + 0, /* KetRmax */ + 0, /* KetRmin */ + 0, /* KetRpos */ + 0, /* Reverse */ + 0, /* Assert */ + 0, /* Assert not */ + 0, /* Assert behind */ + 0, /* Assert behind not */ + 0, 0, /* ONCE, ONCE_NC */ + 0, 0, 0, 0, 0, /* BRA, BRAPOS, CBRA, CBRAPOS, COND */ + 0, 0, 0, 0, 0, /* SBRA, SBRAPOS, SCBRA, SCBRAPOS, SCOND */ + 0, 0, /* CREF, DNCREF */ + 0, 0, /* RREF, DNRREF */ + 0, /* DEF */ + 0, 0, 0, /* BRAZERO, BRAMINZERO, BRAPOSZERO */ + 0, 0, 0, /* MARK, PRUNE, PRUNE_ARG */ + 0, 0, 0, 0, /* SKIP, SKIP_ARG, THEN, THEN_ARG */ + 0, 0, 0, 0, /* COMMIT, FAIL, ACCEPT, ASSERT_ACCEPT */ + 0, 0 /* CLOSE, SKIPZERO */ +}; + +/* These 2 tables allow for compact code for testing for \D, \d, \S, \s, \W, +and \w */ + +static const pcre_uint8 toptable1[] = { + 0, 0, 0, 0, 0, 0, + ctype_digit, ctype_digit, + ctype_space, ctype_space, + ctype_word, ctype_word, + 0, 0 /* OP_ANY, OP_ALLANY */ +}; + +static const pcre_uint8 toptable2[] = { + 0, 0, 0, 0, 0, 0, + ctype_digit, 0, + ctype_space, 0, + ctype_word, 0, + 1, 1 /* OP_ANY, OP_ALLANY */ +}; + + +/* Structure for holding data about a particular state, which is in effect the +current data for an active path through the match tree. It must consist +entirely of ints because the working vector we are passed, and which we put +these structures in, is a vector of ints. */ + +typedef struct stateblock { + int offset; /* Offset to opcode */ + int count; /* Count for repeats */ + int data; /* Some use extra data */ +} stateblock; + +#define INTS_PER_STATEBLOCK (int)(sizeof(stateblock)/sizeof(int)) + + +#ifdef PCRE_DEBUG +/************************************************* +* Print character string * +*************************************************/ + +/* Character string printing function for debugging. + +Arguments: + p points to string + length number of bytes + f where to print + +Returns: nothing +*/ + +static void +pchars(const pcre_uchar *p, int length, FILE *f) +{ +pcre_uint32 c; +while (length-- > 0) + { + if (isprint(c = *(p++))) + fprintf(f, "%c", c); + else + fprintf(f, "\\x{%02x}", c); + } +} +#endif + + + +/************************************************* +* Execute a Regular Expression - DFA engine * +*************************************************/ + +/* This internal function applies a compiled pattern to a subject string, +starting at a given point, using a DFA engine. This function is called from the +external one, possibly multiple times if the pattern is not anchored. The +function calls itself recursively for some kinds of subpattern. + +Arguments: + md the match_data block with fixed information + this_start_code the opening bracket of this subexpression's code + current_subject where we currently are in the subject string + start_offset start offset in the subject string + offsets vector to contain the matching string offsets + offsetcount size of same + workspace vector of workspace + wscount size of same + rlevel function call recursion level + +Returns: > 0 => number of match offset pairs placed in offsets + = 0 => offsets overflowed; longest matches are present + -1 => failed to match + < -1 => some kind of unexpected problem + +The following macros are used for adding states to the two state vectors (one +for the current character, one for the following character). */ + +#define ADD_ACTIVE(x,y) \ + if (active_count++ < wscount) \ + { \ + next_active_state->offset = (x); \ + next_active_state->count = (y); \ + next_active_state++; \ + DPRINTF(("%.*sADD_ACTIVE(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_ACTIVE_DATA(x,y,z) \ + if (active_count++ < wscount) \ + { \ + next_active_state->offset = (x); \ + next_active_state->count = (y); \ + next_active_state->data = (z); \ + next_active_state++; \ + DPRINTF(("%.*sADD_ACTIVE_DATA(%d,%d,%d)\n", rlevel*2-2, SP, (x), (y), (z))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_NEW(x,y) \ + if (new_count++ < wscount) \ + { \ + next_new_state->offset = (x); \ + next_new_state->count = (y); \ + next_new_state++; \ + DPRINTF(("%.*sADD_NEW(%d,%d)\n", rlevel*2-2, SP, (x), (y))); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +#define ADD_NEW_DATA(x,y,z) \ + if (new_count++ < wscount) \ + { \ + next_new_state->offset = (x); \ + next_new_state->count = (y); \ + next_new_state->data = (z); \ + next_new_state++; \ + DPRINTF(("%.*sADD_NEW_DATA(%d,%d,%d) line %d\n", rlevel*2-2, SP, \ + (x), (y), (z), __LINE__)); \ + } \ + else return PCRE_ERROR_DFA_WSSIZE + +/* And now, here is the code */ + +static int +internal_dfa_exec( + dfa_match_data *md, + const pcre_uchar *this_start_code, + const pcre_uchar *current_subject, + int start_offset, + int *offsets, + int offsetcount, + int *workspace, + int wscount, + int rlevel) +{ +stateblock *active_states, *new_states, *temp_states; +stateblock *next_active_state, *next_new_state; + +const pcre_uint8 *ctypes, *lcc, *fcc; +const pcre_uchar *ptr; +const pcre_uchar *end_code, *first_op; + +dfa_recursion_info new_recursive; + +int active_count, new_count, match_count; + +/* Some fields in the md block are frequently referenced, so we load them into +independent variables in the hope that this will perform better. */ + +const pcre_uchar *start_subject = md->start_subject; +const pcre_uchar *end_subject = md->end_subject; +const pcre_uchar *start_code = md->start_code; + +#ifdef SUPPORT_UTF +BOOL utf = (md->poptions & PCRE_UTF8) != 0; +#else +BOOL utf = FALSE; +#endif + +BOOL reset_could_continue = FALSE; + +rlevel++; +offsetcount &= (-2); + +wscount -= 2; +wscount = (wscount - (wscount % (INTS_PER_STATEBLOCK * 2))) / + (2 * INTS_PER_STATEBLOCK); + +DPRINTF(("\n%.*s---------------------\n" + "%.*sCall to internal_dfa_exec f=%d\n", + rlevel*2-2, SP, rlevel*2-2, SP, rlevel)); + +ctypes = md->tables + ctypes_offset; +lcc = md->tables + lcc_offset; +fcc = md->tables + fcc_offset; + +match_count = PCRE_ERROR_NOMATCH; /* A negative number */ + +active_states = (stateblock *)(workspace + 2); +next_new_state = new_states = active_states + wscount; +new_count = 0; + +first_op = this_start_code + 1 + LINK_SIZE + + ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA || + *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS) + ? IMM2_SIZE:0); + +/* The first thing in any (sub) pattern is a bracket of some sort. Push all +the alternative states onto the list, and find out where the end is. This +makes is possible to use this function recursively, when we want to stop at a +matching internal ket rather than at the end. + +If the first opcode in the first alternative is OP_REVERSE, we are dealing with +a backward assertion. In that case, we have to find out the maximum amount to +move back, and set up each alternative appropriately. */ + +if (*first_op == OP_REVERSE) + { + int max_back = 0; + int gone_back; + + end_code = this_start_code; + do + { + int back = GET(end_code, 2+LINK_SIZE); + if (back > max_back) max_back = back; + end_code += GET(end_code, 1); + } + while (*end_code == OP_ALT); + + /* If we can't go back the amount required for the longest lookbehind + pattern, go back as far as we can; some alternatives may still be viable. */ + +#ifdef SUPPORT_UTF + /* In character mode we have to step back character by character */ + + if (utf) + { + for (gone_back = 0; gone_back < max_back; gone_back++) + { + if (current_subject <= start_subject) break; + current_subject--; + ACROSSCHAR(current_subject > start_subject, *current_subject, current_subject--); + } + } + else +#endif + + /* In byte-mode we can do this quickly. */ + + { + gone_back = (current_subject - max_back < start_subject)? + (int)(current_subject - start_subject) : max_back; + current_subject -= gone_back; + } + + /* Save the earliest consulted character */ + + if (current_subject < md->start_used_ptr) + md->start_used_ptr = current_subject; + + /* Now we can process the individual branches. */ + + end_code = this_start_code; + do + { + int back = GET(end_code, 2+LINK_SIZE); + if (back <= gone_back) + { + int bstate = (int)(end_code - start_code + 2 + 2*LINK_SIZE); + ADD_NEW_DATA(-bstate, 0, gone_back - back); + } + end_code += GET(end_code, 1); + } + while (*end_code == OP_ALT); + } + +/* This is the code for a "normal" subpattern (not a backward assertion). The +start of a whole pattern is always one of these. If we are at the top level, +we may be asked to restart matching from the same point that we reached for a +previous partial match. We still have to scan through the top-level branches to +find the end state. */ + +else + { + end_code = this_start_code; + + /* Restarting */ + + if (rlevel == 1 && (md->moptions & PCRE_DFA_RESTART) != 0) + { + do { end_code += GET(end_code, 1); } while (*end_code == OP_ALT); + new_count = workspace[1]; + if (!workspace[0]) + memcpy(new_states, active_states, new_count * sizeof(stateblock)); + } + + /* Not restarting */ + + else + { + int length = 1 + LINK_SIZE + + ((*this_start_code == OP_CBRA || *this_start_code == OP_SCBRA || + *this_start_code == OP_CBRAPOS || *this_start_code == OP_SCBRAPOS) + ? IMM2_SIZE:0); + do + { + ADD_NEW((int)(end_code - start_code + length), 0); + end_code += GET(end_code, 1); + length = 1 + LINK_SIZE; + } + while (*end_code == OP_ALT); + } + } + +workspace[0] = 0; /* Bit indicating which vector is current */ + +DPRINTF(("%.*sEnd state = %d\n", rlevel*2-2, SP, (int)(end_code - start_code))); + +/* Loop for scanning the subject */ + +ptr = current_subject; +for (;;) + { + int i, j; + int clen, dlen; + pcre_uint32 c, d; + int forced_fail = 0; + BOOL partial_newline = FALSE; + BOOL could_continue = reset_could_continue; + reset_could_continue = FALSE; + + /* Make the new state list into the active state list and empty the + new state list. */ + + temp_states = active_states; + active_states = new_states; + new_states = temp_states; + active_count = new_count; + new_count = 0; + + workspace[0] ^= 1; /* Remember for the restarting feature */ + workspace[1] = active_count; + +#ifdef PCRE_DEBUG + printf("%.*sNext character: rest of subject = \"", rlevel*2-2, SP); + pchars(ptr, STRLEN_UC(ptr), stdout); + printf("\"\n"); + + printf("%.*sActive states: ", rlevel*2-2, SP); + for (i = 0; i < active_count; i++) + printf("%d/%d ", active_states[i].offset, active_states[i].count); + printf("\n"); +#endif + + /* Set the pointers for adding new states */ + + next_active_state = active_states + active_count; + next_new_state = new_states; + + /* Load the current character from the subject outside the loop, as many + different states may want to look at it, and we assume that at least one + will. */ + + if (ptr < end_subject) + { + clen = 1; /* Number of data items in the character */ +#ifdef SUPPORT_UTF + GETCHARLENTEST(c, ptr, clen); +#else + c = *ptr; +#endif /* SUPPORT_UTF */ + } + else + { + clen = 0; /* This indicates the end of the subject */ + c = NOTACHAR; /* This value should never actually be used */ + } + + /* Scan up the active states and act on each one. The result of an action + may be to add more states to the currently active list (e.g. on hitting a + parenthesis) or it may be to put states on the new list, for considering + when we move the character pointer on. */ + + for (i = 0; i < active_count; i++) + { + stateblock *current_state = active_states + i; + BOOL caseless = FALSE; + const pcre_uchar *code; + int state_offset = current_state->offset; + int codevalue, rrc; + int count; + +#ifdef PCRE_DEBUG + printf ("%.*sProcessing state %d c=", rlevel*2-2, SP, state_offset); + if (clen == 0) printf("EOL\n"); + else if (c > 32 && c < 127) printf("'%c'\n", c); + else printf("0x%02x\n", c); +#endif + + /* A negative offset is a special case meaning "hold off going to this + (negated) state until the number of characters in the data field have + been skipped". If the could_continue flag was passed over from a previous + state, arrange for it to passed on. */ + + if (state_offset < 0) + { + if (current_state->data > 0) + { + DPRINTF(("%.*sSkipping this character\n", rlevel*2-2, SP)); + ADD_NEW_DATA(state_offset, current_state->count, + current_state->data - 1); + if (could_continue) reset_could_continue = TRUE; + continue; + } + else + { + current_state->offset = state_offset = -state_offset; + } + } + + /* Check for a duplicate state with the same count, and skip if found. + See the note at the head of this module about the possibility of improving + performance here. */ + + for (j = 0; j < i; j++) + { + if (active_states[j].offset == state_offset && + active_states[j].count == current_state->count) + { + DPRINTF(("%.*sDuplicate state: skipped\n", rlevel*2-2, SP)); + goto NEXT_ACTIVE_STATE; + } + } + + /* The state offset is the offset to the opcode */ + + code = start_code + state_offset; + codevalue = *code; + + /* If this opcode inspects a character, but we are at the end of the + subject, remember the fact for use when testing for a partial match. */ + + if (clen == 0 && poptable[codevalue] != 0) + could_continue = TRUE; + + /* If this opcode is followed by an inline character, load it. It is + tempting to test for the presence of a subject character here, but that + is wrong, because sometimes zero repetitions of the subject are + permitted. + + We also use this mechanism for opcodes such as OP_TYPEPLUS that take an + argument that is not a data character - but is always one byte long because + the values are small. We have to take special action to deal with \P, \p, + \H, \h, \V, \v and \X in this case. To keep the other cases fast, convert + these ones to new opcodes. */ + + if (coptable[codevalue] > 0) + { + dlen = 1; +#ifdef SUPPORT_UTF + if (utf) { GETCHARLEN(d, (code + coptable[codevalue]), dlen); } else +#endif /* SUPPORT_UTF */ + d = code[coptable[codevalue]]; + if (codevalue >= OP_TYPESTAR) + { + switch(d) + { + case OP_ANYBYTE: return PCRE_ERROR_DFA_UITEM; + case OP_NOTPROP: + case OP_PROP: codevalue += OP_PROP_EXTRA; break; + case OP_ANYNL: codevalue += OP_ANYNL_EXTRA; break; + case OP_EXTUNI: codevalue += OP_EXTUNI_EXTRA; break; + case OP_NOT_HSPACE: + case OP_HSPACE: codevalue += OP_HSPACE_EXTRA; break; + case OP_NOT_VSPACE: + case OP_VSPACE: codevalue += OP_VSPACE_EXTRA; break; + default: break; + } + } + } + else + { + dlen = 0; /* Not strictly necessary, but compilers moan */ + d = NOTACHAR; /* if these variables are not set. */ + } + + + /* Now process the individual opcodes */ + + switch (codevalue) + { +/* ========================================================================== */ + /* These cases are never obeyed. This is a fudge that causes a compile- + time error if the vectors coptable or poptable, which are indexed by + opcode, are not the correct length. It seems to be the only way to do + such a check at compile time, as the sizeof() operator does not work + in the C preprocessor. */ + + case OP_TABLE_LENGTH: + case OP_TABLE_LENGTH + + ((sizeof(coptable) == OP_TABLE_LENGTH) && + (sizeof(poptable) == OP_TABLE_LENGTH)): + break; + +/* ========================================================================== */ + /* Reached a closing bracket. If not at the end of the pattern, carry + on with the next opcode. For repeating opcodes, also add the repeat + state. Note that KETRPOS will always be encountered at the end of the + subpattern, because the possessive subpattern repeats are always handled + using recursive calls. Thus, it never adds any new states. + + At the end of the (sub)pattern, unless we have an empty string and + PCRE_NOTEMPTY is set, or PCRE_NOTEMPTY_ATSTART is set and we are at the + start of the subject, save the match data, shifting up all previous + matches so we always have the longest first. */ + + case OP_KET: + case OP_KETRMIN: + case OP_KETRMAX: + case OP_KETRPOS: + if (code != end_code) + { + ADD_ACTIVE(state_offset + 1 + LINK_SIZE, 0); + if (codevalue != OP_KET) + { + ADD_ACTIVE(state_offset - GET(code, 1), 0); + } + } + else + { + if (ptr > current_subject || + ((md->moptions & PCRE_NOTEMPTY) == 0 && + ((md->moptions & PCRE_NOTEMPTY_ATSTART) == 0 || + current_subject > start_subject + md->start_offset))) + { + if (match_count < 0) match_count = (offsetcount >= 2)? 1 : 0; + else if (match_count > 0 && ++match_count * 2 > offsetcount) + match_count = 0; + count = ((match_count == 0)? offsetcount : match_count * 2) - 2; + if (count > 0) memmove(offsets + 2, offsets, count * sizeof(int)); + if (offsetcount >= 2) + { + offsets[0] = (int)(current_subject - start_subject); + offsets[1] = (int)(ptr - start_subject); + DPRINTF(("%.*sSet matched string = \"%.*s\"\n", rlevel*2-2, SP, + offsets[1] - offsets[0], (char *)current_subject)); + } + if ((md->moptions & PCRE_DFA_SHORTEST) != 0) + { + DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" + "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, + match_count, rlevel*2-2, SP)); + return match_count; + } + } + } + break; + +/* ========================================================================== */ + /* These opcodes add to the current list of states without looking + at the current character. */ + + /*-----------------------------------------------------------------*/ + case OP_ALT: + do { code += GET(code, 1); } while (*code == OP_ALT); + ADD_ACTIVE((int)(code - start_code), 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_BRA: + case OP_SBRA: + do + { + ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); + code += GET(code, 1); + } + while (*code == OP_ALT); + break; + + /*-----------------------------------------------------------------*/ + case OP_CBRA: + case OP_SCBRA: + ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE + IMM2_SIZE), 0); + code += GET(code, 1); + while (*code == OP_ALT) + { + ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); + code += GET(code, 1); + } + break; + + /*-----------------------------------------------------------------*/ + case OP_BRAZERO: + case OP_BRAMINZERO: + ADD_ACTIVE(state_offset + 1, 0); + code += 1 + GET(code, 2); + while (*code == OP_ALT) code += GET(code, 1); + ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_SKIPZERO: + code += 1 + GET(code, 2); + while (*code == OP_ALT) code += GET(code, 1); + ADD_ACTIVE((int)(code - start_code + 1 + LINK_SIZE), 0); + break; + + /*-----------------------------------------------------------------*/ + case OP_CIRC: + if (ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_CIRCM: + if ((ptr == start_subject && (md->moptions & PCRE_NOTBOL) == 0) || + (ptr != end_subject && WAS_NEWLINE(ptr))) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_EOD: + if (ptr >= end_subject) + { + if ((md->moptions & PCRE_PARTIAL_HARD) != 0) + could_continue = TRUE; + else { ADD_ACTIVE(state_offset + 1, 0); } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_SOD: + if (ptr == start_subject) { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_SOM: + if (ptr == start_subject + start_offset) { ADD_ACTIVE(state_offset + 1, 0); } + break; + + +/* ========================================================================== */ + /* These opcodes inspect the next subject character, and sometimes + the previous one as well, but do not have an argument. The variable + clen contains the length of the current character and is zero if we are + at the end of the subject. */ + + /*-----------------------------------------------------------------*/ + case OP_ANY: + if (clen > 0 && !IS_NEWLINE(ptr)) + { + if (ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else + { + ADD_NEW(state_offset + 1, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_ALLANY: + if (clen > 0) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_EODN: + if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) + could_continue = TRUE; + else if (clen == 0 || (IS_NEWLINE(ptr) && ptr == end_subject - md->nllen)) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_DOLL: + if ((md->moptions & PCRE_NOTEOL) == 0) + { + if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) + could_continue = TRUE; + else if (clen == 0 || + ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr) && + (ptr == end_subject - md->nllen) + )) + { ADD_ACTIVE(state_offset + 1, 0); } + else if (ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + if ((md->moptions & PCRE_PARTIAL_HARD) != 0) + { + reset_could_continue = TRUE; + ADD_NEW_DATA(-(state_offset + 1), 0, 1); + } + else could_continue = partial_newline = TRUE; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_DOLLM: + if ((md->moptions & PCRE_NOTEOL) == 0) + { + if (clen == 0 && (md->moptions & PCRE_PARTIAL_HARD) != 0) + could_continue = TRUE; + else if (clen == 0 || + ((md->poptions & PCRE_DOLLAR_ENDONLY) == 0 && IS_NEWLINE(ptr))) + { ADD_ACTIVE(state_offset + 1, 0); } + else if (ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + if ((md->moptions & PCRE_PARTIAL_HARD) != 0) + { + reset_could_continue = TRUE; + ADD_NEW_DATA(-(state_offset + 1), 0, 1); + } + else could_continue = partial_newline = TRUE; + } + } + else if (IS_NEWLINE(ptr)) + { ADD_ACTIVE(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + + case OP_DIGIT: + case OP_WHITESPACE: + case OP_WORDCHAR: + if (clen > 0 && c < 256 && + ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_DIGIT: + case OP_NOT_WHITESPACE: + case OP_NOT_WORDCHAR: + if (clen > 0 && (c >= 256 || + ((ctypes[c] & toptable1[codevalue]) ^ toptable2[codevalue]) != 0)) + { ADD_NEW(state_offset + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_WORD_BOUNDARY: + case OP_NOT_WORD_BOUNDARY: + { + int left_word, right_word; + + if (ptr > start_subject) + { + const pcre_uchar *temp = ptr - 1; + if (temp < md->start_used_ptr) md->start_used_ptr = temp; +#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 + if (utf) { BACKCHAR(temp); } +#endif + GETCHARTEST(d, temp); +#ifdef SUPPORT_UCP + if ((md->poptions & PCRE_UCP) != 0) + { + if (d == '_') left_word = TRUE; else + { + int cat = UCD_CATEGORY(d); + left_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + left_word = d < 256 && (ctypes[d] & ctype_word) != 0; + } + else left_word = FALSE; + + if (clen > 0) + { +#ifdef SUPPORT_UCP + if ((md->poptions & PCRE_UCP) != 0) + { + if (c == '_') right_word = TRUE; else + { + int cat = UCD_CATEGORY(c); + right_word = (cat == ucp_L || cat == ucp_N); + } + } + else +#endif + right_word = c < 256 && (ctypes[c] & ctype_word) != 0; + } + else right_word = FALSE; + + if ((left_word == right_word) == (codevalue == OP_NOT_WORD_BOUNDARY)) + { ADD_ACTIVE(state_offset + 1, 0); } + } + break; + + + /*-----------------------------------------------------------------*/ + /* Check the next character by Unicode property. We will get here only + if the support is in the binary; otherwise a compile-time error occurs. + */ + +#ifdef SUPPORT_UCP + case OP_PROP: + case OP_NOTPROP: + if (clen > 0) + { + BOOL OK; + const pcre_uint32 *cp; + const ucd_record * prop = GET_UCD(c); + switch(code[1]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt; + break; + + case PT_GC: + OK = PRIV(ucp_gentype)[prop->chartype] == code[2]; + break; + + case PT_PC: + OK = prop->chartype == code[2]; + break; + + case PT_SC: + OK = prop->script == code[2]; + break; + + /* These are specials for combination cases. */ + + case PT_ALNUM: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N; + break; + + /* Perl space used to exclude VT, but from Perl 5.18 it is included, + which means that Perl space and POSIX space are now identical. PCRE + was changed at release 8.34. */ + + case PT_SPACE: /* Perl space */ + case PT_PXSPACE: /* POSIX space */ + switch(c) + { + HSPACE_CASES: + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; + break; + } + break; + + case PT_WORD: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE; + break; + + case PT_CLIST: + cp = PRIV(ucd_caseless_sets) + code[2]; + for (;;) + { + if (c < *cp) { OK = FALSE; break; } + if (c == *cp++) { OK = TRUE; break; } + } + break; + + case PT_UCNC: + OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || + c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || + c >= 0xe000; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (codevalue == OP_PROP)) { ADD_NEW(state_offset + 3, 0); } + } + break; +#endif + + + +/* ========================================================================== */ + /* These opcodes likewise inspect the subject character, but have an + argument that is not a data character. It is one of these opcodes: + OP_ANY, OP_ALLANY, OP_DIGIT, OP_NOT_DIGIT, OP_WHITESPACE, OP_NOT_SPACE, + OP_WORDCHAR, OP_NOT_WORDCHAR. The value is loaded into d. */ + + case OP_TYPEPLUS: + case OP_TYPEMINPLUS: + case OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + if (d == OP_ANY && ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (count > 0 && codevalue == OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEQUERY: + case OP_TYPEMINQUERY: + case OP_TYPEPOSQUERY: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + if (d == OP_ANY && ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + 2, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPESTAR: + case OP_TYPEMINSTAR: + case OP_TYPEPOSSTAR: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + if (d == OP_ANY && ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSSTAR) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEEXACT: + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + if (d == OP_ANY && ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (++count >= (int)GET2(code, 1)) + { ADD_NEW(state_offset + 1 + IMM2_SIZE + 1, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_TYPEUPTO: + case OP_TYPEMINUPTO: + case OP_TYPEPOSUPTO: + ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + if (d == OP_ANY && ptr + 1 >= md->end_subject && + (md->moptions & (PCRE_PARTIAL_HARD)) != 0 && + NLBLOCK->nltype == NLTYPE_FIXED && + NLBLOCK->nllen == 2 && + c == NLBLOCK->nl[0]) + { + could_continue = partial_newline = TRUE; + } + else if ((c >= 256 && d != OP_DIGIT && d != OP_WHITESPACE && d != OP_WORDCHAR) || + (c < 256 && + (d != OP_ANY || !IS_NEWLINE(ptr)) && + ((ctypes[c] & toptable1[d]) ^ toptable2[d]) != 0)) + { + if (codevalue == OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW(state_offset + 2 + IMM2_SIZE, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + +/* ========================================================================== */ + /* These are virtual opcodes that are used when something like + OP_TYPEPLUS has OP_PROP, OP_NOTPROP, OP_ANYNL, or OP_EXTUNI as its + argument. It keeps the code above fast for the other cases. The argument + is in the d variable. */ + +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEPLUS: + case OP_PROP_EXTRA + OP_TYPEMINPLUS: + case OP_PROP_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 4, 0); } + if (clen > 0) + { + BOOL OK; + const pcre_uint32 *cp; + const ucd_record * prop = GET_UCD(c); + switch(code[2]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt; + break; + + case PT_GC: + OK = PRIV(ucp_gentype)[prop->chartype] == code[3]; + break; + + case PT_PC: + OK = prop->chartype == code[3]; + break; + + case PT_SC: + OK = prop->script == code[3]; + break; + + /* These are specials for combination cases. */ + + case PT_ALNUM: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N; + break; + + /* Perl space used to exclude VT, but from Perl 5.18 it is included, + which means that Perl space and POSIX space are now identical. PCRE + was changed at release 8.34. */ + + case PT_SPACE: /* Perl space */ + case PT_PXSPACE: /* POSIX space */ + switch(c) + { + HSPACE_CASES: + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; + break; + } + break; + + case PT_WORD: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE; + break; + + case PT_CLIST: + cp = PRIV(ucd_caseless_sets) + code[3]; + for (;;) + { + if (c < *cp) { OK = FALSE; break; } + if (c == *cp++) { OK = TRUE; break; } + } + break; + + case PT_UCNC: + OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || + c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || + c >= 0xe000; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (count > 0 && codevalue == OP_PROP_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEPLUS: + case OP_EXTUNI_EXTRA + OP_TYPEMINPLUS: + case OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + int lgb, rgb; + const pcre_uchar *nptr = ptr + clen; + int ncount = 0; + if (count > 0 && codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + lgb = UCD_GRAPHBREAK(c); + while (nptr < end_subject) + { + dlen = 1; + if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } + rgb = UCD_GRAPHBREAK(d); + if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; + ncount++; + lgb = rgb; + nptr += dlen; + } + count++; + ADD_NEW_DATA(-state_offset, count, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEPLUS: + case OP_ANYNL_EXTRA + OP_TYPEMINPLUS: + case OP_ANYNL_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case CHAR_VT: + case CHAR_FF: + case CHAR_NEL: +#ifndef EBCDIC + case 0x2028: + case 0x2029: +#endif /* Not EBCDIC */ + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL01; + + case CHAR_CR: + if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; + /* Fall through */ + + ANYNL01: + case CHAR_LF: + if (count > 0 && codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, ncount); + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEPLUS: + case OP_VSPACE_EXTRA + OP_TYPEMINPLUS: + case OP_VSPACE_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + BOOL OK; + switch (c) + { + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_VSPACE)) + { + if (count > 0 && codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEPLUS: + case OP_HSPACE_EXTRA + OP_TYPEMINPLUS: + case OP_HSPACE_EXTRA + OP_TYPEPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + 2, 0); } + if (clen > 0) + { + BOOL OK; + switch (c) + { + HSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (count > 0 && codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW_DATA(-state_offset, count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEQUERY: + case OP_PROP_EXTRA + OP_TYPEMINQUERY: + case OP_PROP_EXTRA + OP_TYPEPOSQUERY: + count = 4; + goto QS1; + + case OP_PROP_EXTRA + OP_TYPESTAR: + case OP_PROP_EXTRA + OP_TYPEMINSTAR: + case OP_PROP_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS1: + + ADD_ACTIVE(state_offset + 4, 0); + if (clen > 0) + { + BOOL OK; + const pcre_uint32 *cp; + const ucd_record * prop = GET_UCD(c); + switch(code[2]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt; + break; + + case PT_GC: + OK = PRIV(ucp_gentype)[prop->chartype] == code[3]; + break; + + case PT_PC: + OK = prop->chartype == code[3]; + break; + + case PT_SC: + OK = prop->script == code[3]; + break; + + /* These are specials for combination cases. */ + + case PT_ALNUM: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N; + break; + + /* Perl space used to exclude VT, but from Perl 5.18 it is included, + which means that Perl space and POSIX space are now identical. PCRE + was changed at release 8.34. */ + + case PT_SPACE: /* Perl space */ + case PT_PXSPACE: /* POSIX space */ + switch(c) + { + HSPACE_CASES: + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; + break; + } + break; + + case PT_WORD: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE; + break; + + case PT_CLIST: + cp = PRIV(ucd_caseless_sets) + code[3]; + for (;;) + { + if (c < *cp) { OK = FALSE; break; } + if (c == *cp++) { OK = TRUE; break; } + } + break; + + case PT_UCNC: + OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || + c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || + c >= 0xe000; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_PROP_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + count, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEQUERY: + case OP_EXTUNI_EXTRA + OP_TYPEMINQUERY: + case OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS2; + + case OP_EXTUNI_EXTRA + OP_TYPESTAR: + case OP_EXTUNI_EXTRA + OP_TYPEMINSTAR: + case OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS2: + + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + int lgb, rgb; + const pcre_uchar *nptr = ptr + clen; + int ncount = 0; + if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + lgb = UCD_GRAPHBREAK(c); + while (nptr < end_subject) + { + dlen = 1; + if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } + rgb = UCD_GRAPHBREAK(d); + if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; + ncount++; + lgb = rgb; + nptr += dlen; + } + ADD_NEW_DATA(-(state_offset + count), 0, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEQUERY: + case OP_ANYNL_EXTRA + OP_TYPEMINQUERY: + case OP_ANYNL_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS3; + + case OP_ANYNL_EXTRA + OP_TYPESTAR: + case OP_ANYNL_EXTRA + OP_TYPEMINSTAR: + case OP_ANYNL_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS3: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case CHAR_VT: + case CHAR_FF: + case CHAR_NEL: +#ifndef EBCDIC + case 0x2028: + case 0x2029: +#endif /* Not EBCDIC */ + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL02; + + case CHAR_CR: + if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; + /* Fall through */ + + ANYNL02: + case CHAR_LF: + if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + (int)count), 0, ncount); + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEQUERY: + case OP_VSPACE_EXTRA + OP_TYPEMINQUERY: + case OP_VSPACE_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS4; + + case OP_VSPACE_EXTRA + OP_TYPESTAR: + case OP_VSPACE_EXTRA + OP_TYPEMINSTAR: + case OP_VSPACE_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS4: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + BOOL OK; + switch (c) + { + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + if (OK == (d == OP_VSPACE)) + { + if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + (int)count), 0, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEQUERY: + case OP_HSPACE_EXTRA + OP_TYPEMINQUERY: + case OP_HSPACE_EXTRA + OP_TYPEPOSQUERY: + count = 2; + goto QS5; + + case OP_HSPACE_EXTRA + OP_TYPESTAR: + case OP_HSPACE_EXTRA + OP_TYPEMINSTAR: + case OP_HSPACE_EXTRA + OP_TYPEPOSSTAR: + count = 0; + + QS5: + ADD_ACTIVE(state_offset + 2, 0); + if (clen > 0) + { + BOOL OK; + switch (c) + { + HSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSSTAR || + codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW_DATA(-(state_offset + (int)count), 0, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ +#ifdef SUPPORT_UCP + case OP_PROP_EXTRA + OP_TYPEEXACT: + case OP_PROP_EXTRA + OP_TYPEUPTO: + case OP_PROP_EXTRA + OP_TYPEMINUPTO: + case OP_PROP_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_PROP_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 1 + IMM2_SIZE + 3, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + const pcre_uint32 *cp; + const ucd_record * prop = GET_UCD(c); + switch(code[1 + IMM2_SIZE + 1]) + { + case PT_ANY: + OK = TRUE; + break; + + case PT_LAMP: + OK = prop->chartype == ucp_Lu || prop->chartype == ucp_Ll || + prop->chartype == ucp_Lt; + break; + + case PT_GC: + OK = PRIV(ucp_gentype)[prop->chartype] == code[1 + IMM2_SIZE + 2]; + break; + + case PT_PC: + OK = prop->chartype == code[1 + IMM2_SIZE + 2]; + break; + + case PT_SC: + OK = prop->script == code[1 + IMM2_SIZE + 2]; + break; + + /* These are specials for combination cases. */ + + case PT_ALNUM: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N; + break; + + /* Perl space used to exclude VT, but from Perl 5.18 it is included, + which means that Perl space and POSIX space are now identical. PCRE + was changed at release 8.34. */ + + case PT_SPACE: /* Perl space */ + case PT_PXSPACE: /* POSIX space */ + switch(c) + { + HSPACE_CASES: + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_Z; + break; + } + break; + + case PT_WORD: + OK = PRIV(ucp_gentype)[prop->chartype] == ucp_L || + PRIV(ucp_gentype)[prop->chartype] == ucp_N || + c == CHAR_UNDERSCORE; + break; + + case PT_CLIST: + cp = PRIV(ucd_caseless_sets) + code[1 + IMM2_SIZE + 2]; + for (;;) + { + if (c < *cp) { OK = FALSE; break; } + if (c == *cp++) { OK = TRUE; break; } + } + break; + + case PT_UCNC: + OK = c == CHAR_DOLLAR_SIGN || c == CHAR_COMMERCIAL_AT || + c == CHAR_GRAVE_ACCENT || (c >= 0xa0 && c <= 0xd7ff) || + c >= 0xe000; + break; + + /* Should never occur, but keep compilers from grumbling. */ + + default: + OK = codevalue != OP_PROP; + break; + } + + if (OK == (d == OP_PROP)) + { + if (codevalue == OP_PROP_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW(state_offset + 1 + IMM2_SIZE + 3, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXTUNI_EXTRA + OP_TYPEEXACT: + case OP_EXTUNI_EXTRA + OP_TYPEUPTO: + case OP_EXTUNI_EXTRA + OP_TYPEMINUPTO: + case OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_EXTUNI_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + int lgb, rgb; + const pcre_uchar *nptr = ptr + clen; + int ncount = 0; + if (codevalue == OP_EXTUNI_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + lgb = UCD_GRAPHBREAK(c); + while (nptr < end_subject) + { + dlen = 1; + if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } + rgb = UCD_GRAPHBREAK(d); + if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; + ncount++; + lgb = rgb; + nptr += dlen; + } + if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0) + reset_could_continue = TRUE; + if (++count >= (int)GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); } + else + { ADD_NEW_DATA(-state_offset, count, ncount); } + } + break; +#endif + + /*-----------------------------------------------------------------*/ + case OP_ANYNL_EXTRA + OP_TYPEEXACT: + case OP_ANYNL_EXTRA + OP_TYPEUPTO: + case OP_ANYNL_EXTRA + OP_TYPEMINUPTO: + case OP_ANYNL_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_ANYNL_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + int ncount = 0; + switch (c) + { + case CHAR_VT: + case CHAR_FF: + case CHAR_NEL: +#ifndef EBCDIC + case 0x2028: + case 0x2029: +#endif /* Not EBCDIC */ + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + goto ANYNL03; + + case CHAR_CR: + if (ptr + 1 < end_subject && UCHAR21TEST(ptr + 1) == CHAR_LF) ncount = 1; + /* Fall through */ + + ANYNL03: + case CHAR_LF: + if (codevalue == OP_ANYNL_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, ncount); } + else + { ADD_NEW_DATA(-state_offset, count, ncount); } + break; + + default: + break; + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE_EXTRA + OP_TYPEEXACT: + case OP_VSPACE_EXTRA + OP_TYPEUPTO: + case OP_VSPACE_EXTRA + OP_TYPEMINUPTO: + case OP_VSPACE_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_VSPACE_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + switch (c) + { + VSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + } + + if (OK == (d == OP_VSPACE)) + { + if (codevalue == OP_VSPACE_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); } + else + { ADD_NEW_DATA(-state_offset, count, 0); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE_EXTRA + OP_TYPEEXACT: + case OP_HSPACE_EXTRA + OP_TYPEUPTO: + case OP_HSPACE_EXTRA + OP_TYPEMINUPTO: + case OP_HSPACE_EXTRA + OP_TYPEPOSUPTO: + if (codevalue != OP_HSPACE_EXTRA + OP_TYPEEXACT) + { ADD_ACTIVE(state_offset + 2 + IMM2_SIZE, 0); } + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + BOOL OK; + switch (c) + { + HSPACE_CASES: + OK = TRUE; + break; + + default: + OK = FALSE; + break; + } + + if (OK == (d == OP_HSPACE)) + { + if (codevalue == OP_HSPACE_EXTRA + OP_TYPEPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW_DATA(-(state_offset + 2 + IMM2_SIZE), 0, 0); } + else + { ADD_NEW_DATA(-state_offset, count, 0); } + } + } + break; + +/* ========================================================================== */ + /* These opcodes are followed by a character that is usually compared + to the current subject character; it is loaded into d. We still get + here even if there is no subject character, because in some cases zero + repetitions are permitted. */ + + /*-----------------------------------------------------------------*/ + case OP_CHAR: + if (clen > 0 && c == d) { ADD_NEW(state_offset + dlen + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + case OP_CHARI: + if (clen == 0) break; + +#ifdef SUPPORT_UTF + if (utf) + { + if (c == d) { ADD_NEW(state_offset + dlen + 1, 0); } else + { + unsigned int othercase; + if (c < 128) + othercase = fcc[c]; + else + /* If we have Unicode property support, we can use it to test the + other case of the character. */ +#ifdef SUPPORT_UCP + othercase = UCD_OTHERCASE(c); +#else + othercase = NOTACHAR; +#endif + + if (d == othercase) { ADD_NEW(state_offset + dlen + 1, 0); } + } + } + else +#endif /* SUPPORT_UTF */ + /* Not UTF mode */ + { + if (TABLE_GET(c, lcc, c) == TABLE_GET(d, lcc, d)) + { ADD_NEW(state_offset + 2, 0); } + } + break; + + +#ifdef SUPPORT_UCP + /*-----------------------------------------------------------------*/ + /* This is a tricky one because it can match more than one character. + Find out how many characters to skip, and then set up a negative state + to wait for them to pass before continuing. */ + + case OP_EXTUNI: + if (clen > 0) + { + int lgb, rgb; + const pcre_uchar *nptr = ptr + clen; + int ncount = 0; + lgb = UCD_GRAPHBREAK(c); + while (nptr < end_subject) + { + dlen = 1; + if (!utf) d = *nptr; else { GETCHARLEN(d, nptr, dlen); } + rgb = UCD_GRAPHBREAK(d); + if ((PRIV(ucp_gbtable)[lgb] & (1 << rgb)) == 0) break; + ncount++; + lgb = rgb; + nptr += dlen; + } + if (nptr >= end_subject && (md->moptions & PCRE_PARTIAL_HARD) != 0) + reset_could_continue = TRUE; + ADD_NEW_DATA(-(state_offset + 1), 0, ncount); + } + break; +#endif + + /*-----------------------------------------------------------------*/ + /* This is a tricky like EXTUNI because it too can match more than one + character (when CR is followed by LF). In this case, set up a negative + state to wait for one character to pass before continuing. */ + + case OP_ANYNL: + if (clen > 0) switch(c) + { + case CHAR_VT: + case CHAR_FF: + case CHAR_NEL: +#ifndef EBCDIC + case 0x2028: + case 0x2029: +#endif /* Not EBCDIC */ + if ((md->moptions & PCRE_BSR_ANYCRLF) != 0) break; + + case CHAR_LF: + ADD_NEW(state_offset + 1, 0); + break; + + case CHAR_CR: + if (ptr + 1 >= end_subject) + { + ADD_NEW(state_offset + 1, 0); + if ((md->moptions & PCRE_PARTIAL_HARD) != 0) + reset_could_continue = TRUE; + } + else if (UCHAR21TEST(ptr + 1) == CHAR_LF) + { + ADD_NEW_DATA(-(state_offset + 1), 0, 1); + } + else + { + ADD_NEW(state_offset + 1, 0); + } + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_VSPACE: + if (clen > 0) switch(c) + { + VSPACE_CASES: + break; + + default: + ADD_NEW(state_offset + 1, 0); + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_VSPACE: + if (clen > 0) switch(c) + { + VSPACE_CASES: + ADD_NEW(state_offset + 1, 0); + break; + + default: + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_NOT_HSPACE: + if (clen > 0) switch(c) + { + HSPACE_CASES: + break; + + default: + ADD_NEW(state_offset + 1, 0); + break; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_HSPACE: + if (clen > 0) switch(c) + { + HSPACE_CASES: + ADD_NEW(state_offset + 1, 0); + break; + + default: + break; + } + break; + + /*-----------------------------------------------------------------*/ + /* Match a negated single character casefully. */ + + case OP_NOT: + if (clen > 0 && c != d) { ADD_NEW(state_offset + dlen + 1, 0); } + break; + + /*-----------------------------------------------------------------*/ + /* Match a negated single character caselessly. */ + + case OP_NOTI: + if (clen > 0) + { + pcre_uint32 otherd; +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#else + otherd = d; +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + if (c != d && c != otherd) + { ADD_NEW(state_offset + dlen + 1, 0); } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_PLUSI: + case OP_MINPLUSI: + case OP_POSPLUSI: + case OP_NOTPLUSI: + case OP_NOTMINPLUSI: + case OP_NOTPOSPLUSI: + caseless = TRUE; + codevalue -= OP_STARI - OP_STAR; + + /* Fall through */ + case OP_PLUS: + case OP_MINPLUS: + case OP_POSPLUS: + case OP_NOTPLUS: + case OP_NOTMINPLUS: + case OP_NOTPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(state_offset + dlen + 1, 0); } + if (clen > 0) + { + pcre_uint32 otherd = NOTACHAR; + if (caseless) + { +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (count > 0 && + (codevalue == OP_POSPLUS || codevalue == OP_NOTPOSPLUS)) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_QUERYI: + case OP_MINQUERYI: + case OP_POSQUERYI: + case OP_NOTQUERYI: + case OP_NOTMINQUERYI: + case OP_NOTPOSQUERYI: + caseless = TRUE; + codevalue -= OP_STARI - OP_STAR; + /* Fall through */ + case OP_QUERY: + case OP_MINQUERY: + case OP_POSQUERY: + case OP_NOTQUERY: + case OP_NOTMINQUERY: + case OP_NOTPOSQUERY: + ADD_ACTIVE(state_offset + dlen + 1, 0); + if (clen > 0) + { + pcre_uint32 otherd = NOTACHAR; + if (caseless) + { +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSQUERY || codevalue == OP_NOTPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset + dlen + 1, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_STARI: + case OP_MINSTARI: + case OP_POSSTARI: + case OP_NOTSTARI: + case OP_NOTMINSTARI: + case OP_NOTPOSSTARI: + caseless = TRUE; + codevalue -= OP_STARI - OP_STAR; + /* Fall through */ + case OP_STAR: + case OP_MINSTAR: + case OP_POSSTAR: + case OP_NOTSTAR: + case OP_NOTMINSTAR: + case OP_NOTPOSSTAR: + ADD_ACTIVE(state_offset + dlen + 1, 0); + if (clen > 0) + { + pcre_uint32 otherd = NOTACHAR; + if (caseless) + { +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSSTAR || codevalue == OP_NOTPOSSTAR) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset, 0); + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_EXACTI: + case OP_NOTEXACTI: + caseless = TRUE; + codevalue -= OP_STARI - OP_STAR; + /* Fall through */ + case OP_EXACT: + case OP_NOTEXACT: + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + pcre_uint32 otherd = NOTACHAR; + if (caseless) + { +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (++count >= (int)GET2(code, 1)) + { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_UPTOI: + case OP_MINUPTOI: + case OP_POSUPTOI: + case OP_NOTUPTOI: + case OP_NOTMINUPTOI: + case OP_NOTPOSUPTOI: + caseless = TRUE; + codevalue -= OP_STARI - OP_STAR; + /* Fall through */ + case OP_UPTO: + case OP_MINUPTO: + case OP_POSUPTO: + case OP_NOTUPTO: + case OP_NOTMINUPTO: + case OP_NOTPOSUPTO: + ADD_ACTIVE(state_offset + dlen + 1 + IMM2_SIZE, 0); + count = current_state->count; /* Number already matched */ + if (clen > 0) + { + pcre_uint32 otherd = NOTACHAR; + if (caseless) + { +#ifdef SUPPORT_UTF + if (utf && d >= 128) + { +#ifdef SUPPORT_UCP + otherd = UCD_OTHERCASE(d); +#endif /* SUPPORT_UCP */ + } + else +#endif /* SUPPORT_UTF */ + otherd = TABLE_GET(d, fcc, d); + } + if ((c == d || c == otherd) == (codevalue < OP_NOTSTAR)) + { + if (codevalue == OP_POSUPTO || codevalue == OP_NOTPOSUPTO) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= (int)GET2(code, 1)) + { ADD_NEW(state_offset + dlen + 1 + IMM2_SIZE, 0); } + else + { ADD_NEW(state_offset, count); } + } + } + break; + + +/* ========================================================================== */ + /* These are the class-handling opcodes */ + + case OP_CLASS: + case OP_NCLASS: + case OP_XCLASS: + { + BOOL isinclass = FALSE; + int next_state_offset; + const pcre_uchar *ecode; + + /* For a simple class, there is always just a 32-byte table, and we + can set isinclass from it. */ + + if (codevalue != OP_XCLASS) + { + ecode = code + 1 + (32 / sizeof(pcre_uchar)); + if (clen > 0) + { + isinclass = (c > 255)? (codevalue == OP_NCLASS) : + ((((pcre_uint8 *)(code + 1))[c/8] & (1 << (c&7))) != 0); + } + } + + /* An extended class may have a table or a list of single characters, + ranges, or both, and it may be positive or negative. There's a + function that sorts all this out. */ + + else + { + ecode = code + GET(code, 1); + if (clen > 0) isinclass = PRIV(xclass)(c, code + 1 + LINK_SIZE, utf); + } + + /* At this point, isinclass is set for all kinds of class, and ecode + points to the byte after the end of the class. If there is a + quantifier, this is where it will be. */ + + next_state_offset = (int)(ecode - start_code); + + switch (*ecode) + { + case OP_CRSTAR: + case OP_CRMINSTAR: + case OP_CRPOSSTAR: + ADD_ACTIVE(next_state_offset + 1, 0); + if (isinclass) + { + if (*ecode == OP_CRPOSSTAR) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(state_offset, 0); + } + break; + + case OP_CRPLUS: + case OP_CRMINPLUS: + case OP_CRPOSPLUS: + count = current_state->count; /* Already matched */ + if (count > 0) { ADD_ACTIVE(next_state_offset + 1, 0); } + if (isinclass) + { + if (count > 0 && *ecode == OP_CRPOSPLUS) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + count++; + ADD_NEW(state_offset, count); + } + break; + + case OP_CRQUERY: + case OP_CRMINQUERY: + case OP_CRPOSQUERY: + ADD_ACTIVE(next_state_offset + 1, 0); + if (isinclass) + { + if (*ecode == OP_CRPOSQUERY) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + ADD_NEW(next_state_offset + 1, 0); + } + break; + + case OP_CRRANGE: + case OP_CRMINRANGE: + case OP_CRPOSRANGE: + count = current_state->count; /* Already matched */ + if (count >= (int)GET2(ecode, 1)) + { ADD_ACTIVE(next_state_offset + 1 + 2 * IMM2_SIZE, 0); } + if (isinclass) + { + int max = (int)GET2(ecode, 1 + IMM2_SIZE); + if (*ecode == OP_CRPOSRANGE && count >= (int)GET2(ecode, 1)) + { + active_count--; /* Remove non-match possibility */ + next_active_state--; + } + if (++count >= max && max != 0) /* Max 0 => no limit */ + { ADD_NEW(next_state_offset + 1 + 2 * IMM2_SIZE, 0); } + else + { ADD_NEW(state_offset, count); } + } + break; + + default: + if (isinclass) { ADD_NEW(next_state_offset, 0); } + break; + } + } + break; + +/* ========================================================================== */ + /* These are the opcodes for fancy brackets of various kinds. We have + to use recursion in order to handle them. The "always failing" assertion + (?!) is optimised to OP_FAIL when compiling, so we have to support that, + though the other "backtracking verbs" are not supported. */ + + case OP_FAIL: + forced_fail++; /* Count FAILs for multiple states */ + break; + + case OP_ASSERT: + case OP_ASSERT_NOT: + case OP_ASSERTBACK: + case OP_ASSERTBACK_NOT: + { + int rc; + int local_offsets[2]; + int local_workspace[1000]; + const pcre_uchar *endasscode = code + GET(code, 1); + + while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); + + rc = internal_dfa_exec( + md, /* static match data */ + code, /* this subexpression's code */ + ptr, /* where we currently are */ + (int)(ptr - start_subject), /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + rlevel); /* function recursion level */ + + if (rc == PCRE_ERROR_DFA_UITEM) return rc; + if ((rc >= 0) == (codevalue == OP_ASSERT || codevalue == OP_ASSERTBACK)) + { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_COND: + case OP_SCOND: + { + int local_offsets[1000]; + int local_workspace[1000]; + int codelink = GET(code, 1); + int condcode; + + /* Because of the way auto-callout works during compile, a callout item + is inserted between OP_COND and an assertion condition. This does not + happen for the other conditions. */ + + if (code[LINK_SIZE+1] == OP_CALLOUT) + { + rrc = 0; + if (PUBL(callout) != NULL) + { + PUBL(callout_block) cb; + cb.version = 1; /* Version 1 of the callout block */ + cb.callout_number = code[LINK_SIZE+2]; + cb.offset_vector = offsets; +#if defined COMPILE_PCRE8 + cb.subject = (PCRE_SPTR)start_subject; +#elif defined COMPILE_PCRE16 + cb.subject = (PCRE_SPTR16)start_subject; +#elif defined COMPILE_PCRE32 + cb.subject = (PCRE_SPTR32)start_subject; +#endif + cb.subject_length = (int)(end_subject - start_subject); + cb.start_match = (int)(current_subject - start_subject); + cb.current_position = (int)(ptr - start_subject); + cb.pattern_position = GET(code, LINK_SIZE + 3); + cb.next_item_length = GET(code, 3 + 2*LINK_SIZE); + cb.capture_top = 1; + cb.capture_last = -1; + cb.callout_data = md->callout_data; + cb.mark = NULL; /* No (*MARK) support */ + if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc; /* Abandon */ + } + if (rrc > 0) break; /* Fail this thread */ + code += PRIV(OP_lengths)[OP_CALLOUT]; /* Skip callout data */ + } + + condcode = code[LINK_SIZE+1]; + + /* Back reference conditions and duplicate named recursion conditions + are not supported */ + + if (condcode == OP_CREF || condcode == OP_DNCREF || + condcode == OP_DNRREF) + return PCRE_ERROR_DFA_UCOND; + + /* The DEFINE condition is always false, and the assertion (?!) is + converted to OP_FAIL. */ + + if (condcode == OP_DEF || condcode == OP_FAIL) + { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } + + /* The only supported version of OP_RREF is for the value RREF_ANY, + which means "test if in any recursion". We can't test for specifically + recursed groups. */ + + else if (condcode == OP_RREF) + { + int value = GET2(code, LINK_SIZE + 2); + if (value != RREF_ANY) return PCRE_ERROR_DFA_UCOND; + if (md->recursive != NULL) + { ADD_ACTIVE(state_offset + LINK_SIZE + 2 + IMM2_SIZE, 0); } + else { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } + } + + /* Otherwise, the condition is an assertion */ + + else + { + int rc; + const pcre_uchar *asscode = code + LINK_SIZE + 1; + const pcre_uchar *endasscode = asscode + GET(asscode, 1); + + while (*endasscode == OP_ALT) endasscode += GET(endasscode, 1); + + rc = internal_dfa_exec( + md, /* fixed match data */ + asscode, /* this subexpression's code */ + ptr, /* where we currently are */ + (int)(ptr - start_subject), /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + rlevel); /* function recursion level */ + + if (rc == PCRE_ERROR_DFA_UITEM) return rc; + if ((rc >= 0) == + (condcode == OP_ASSERT || condcode == OP_ASSERTBACK)) + { ADD_ACTIVE((int)(endasscode + LINK_SIZE + 1 - start_code), 0); } + else + { ADD_ACTIVE(state_offset + codelink + LINK_SIZE + 1, 0); } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_RECURSE: + { + dfa_recursion_info *ri; + int local_offsets[1000]; + int local_workspace[1000]; + const pcre_uchar *callpat = start_code + GET(code, 1); + int recno = (callpat == md->start_code)? 0 : + GET2(callpat, 1 + LINK_SIZE); + int rc; + + DPRINTF(("%.*sStarting regex recursion\n", rlevel*2-2, SP)); + + /* Check for repeating a recursion without advancing the subject + pointer. This should catch convoluted mutual recursions. (Some simple + cases are caught at compile time.) */ + + for (ri = md->recursive; ri != NULL; ri = ri->prevrec) + if (recno == ri->group_num && ptr == ri->subject_position) + return PCRE_ERROR_RECURSELOOP; + + /* Remember this recursion and where we started it so as to + catch infinite loops. */ + + new_recursive.group_num = recno; + new_recursive.subject_position = ptr; + new_recursive.prevrec = md->recursive; + md->recursive = &new_recursive; + + rc = internal_dfa_exec( + md, /* fixed match data */ + callpat, /* this subexpression's code */ + ptr, /* where we currently are */ + (int)(ptr - start_subject), /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + rlevel); /* function recursion level */ + + md->recursive = new_recursive.prevrec; /* Done this recursion */ + + DPRINTF(("%.*sReturn from regex recursion: rc=%d\n", rlevel*2-2, SP, + rc)); + + /* Ran out of internal offsets */ + + if (rc == 0) return PCRE_ERROR_DFA_RECURSE; + + /* For each successful matched substring, set up the next state with a + count of characters to skip before trying it. Note that the count is in + characters, not bytes. */ + + if (rc > 0) + { + for (rc = rc*2 - 2; rc >= 0; rc -= 2) + { + int charcount = local_offsets[rc+1] - local_offsets[rc]; +#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 + if (utf) + { + const pcre_uchar *p = start_subject + local_offsets[rc]; + const pcre_uchar *pp = start_subject + local_offsets[rc+1]; + while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; + } +#endif + if (charcount > 0) + { + ADD_NEW_DATA(-(state_offset + LINK_SIZE + 1), 0, (charcount - 1)); + } + else + { + ADD_ACTIVE(state_offset + LINK_SIZE + 1, 0); + } + } + } + else if (rc != PCRE_ERROR_NOMATCH) return rc; + } + break; + + /*-----------------------------------------------------------------*/ + case OP_BRAPOS: + case OP_SBRAPOS: + case OP_CBRAPOS: + case OP_SCBRAPOS: + case OP_BRAPOSZERO: + { + int charcount, matched_count; + const pcre_uchar *local_ptr = ptr; + BOOL allow_zero; + + if (codevalue == OP_BRAPOSZERO) + { + allow_zero = TRUE; + codevalue = *(++code); /* Codevalue will be one of above BRAs */ + } + else allow_zero = FALSE; + + /* Loop to match the subpattern as many times as possible as if it were + a complete pattern. */ + + for (matched_count = 0;; matched_count++) + { + int local_offsets[2]; + int local_workspace[1000]; + + int rc = internal_dfa_exec( + md, /* fixed match data */ + code, /* this subexpression's code */ + local_ptr, /* where we currently are */ + (int)(ptr - start_subject), /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + rlevel); /* function recursion level */ + + /* Failed to match */ + + if (rc < 0) + { + if (rc != PCRE_ERROR_NOMATCH) return rc; + break; + } + + /* Matched: break the loop if zero characters matched. */ + + charcount = local_offsets[1] - local_offsets[0]; + if (charcount == 0) break; + local_ptr += charcount; /* Advance temporary position ptr */ + } + + /* At this point we have matched the subpattern matched_count + times, and local_ptr is pointing to the character after the end of the + last match. */ + + if (matched_count > 0 || allow_zero) + { + const pcre_uchar *end_subpattern = code; + int next_state_offset; + + do { end_subpattern += GET(end_subpattern, 1); } + while (*end_subpattern == OP_ALT); + next_state_offset = + (int)(end_subpattern - start_code + LINK_SIZE + 1); + + /* Optimization: if there are no more active states, and there + are no new states yet set up, then skip over the subject string + right here, to save looping. Otherwise, set up the new state to swing + into action when the end of the matched substring is reached. */ + + if (i + 1 >= active_count && new_count == 0) + { + ptr = local_ptr; + clen = 0; + ADD_NEW(next_state_offset, 0); + } + else + { + const pcre_uchar *p = ptr; + const pcre_uchar *pp = local_ptr; + charcount = (int)(pp - p); +#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 + if (utf) while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; +#endif + ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1)); + } + } + } + break; + + /*-----------------------------------------------------------------*/ + case OP_ONCE: + case OP_ONCE_NC: + { + int local_offsets[2]; + int local_workspace[1000]; + + int rc = internal_dfa_exec( + md, /* fixed match data */ + code, /* this subexpression's code */ + ptr, /* where we currently are */ + (int)(ptr - start_subject), /* start offset */ + local_offsets, /* offset vector */ + sizeof(local_offsets)/sizeof(int), /* size of same */ + local_workspace, /* workspace vector */ + sizeof(local_workspace)/sizeof(int), /* size of same */ + rlevel); /* function recursion level */ + + if (rc >= 0) + { + const pcre_uchar *end_subpattern = code; + int charcount = local_offsets[1] - local_offsets[0]; + int next_state_offset, repeat_state_offset; + + do { end_subpattern += GET(end_subpattern, 1); } + while (*end_subpattern == OP_ALT); + next_state_offset = + (int)(end_subpattern - start_code + LINK_SIZE + 1); + + /* If the end of this subpattern is KETRMAX or KETRMIN, we must + arrange for the repeat state also to be added to the relevant list. + Calculate the offset, or set -1 for no repeat. */ + + repeat_state_offset = (*end_subpattern == OP_KETRMAX || + *end_subpattern == OP_KETRMIN)? + (int)(end_subpattern - start_code - GET(end_subpattern, 1)) : -1; + + /* If we have matched an empty string, add the next state at the + current character pointer. This is important so that the duplicate + checking kicks in, which is what breaks infinite loops that match an + empty string. */ + + if (charcount == 0) + { + ADD_ACTIVE(next_state_offset, 0); + } + + /* Optimization: if there are no more active states, and there + are no new states yet set up, then skip over the subject string + right here, to save looping. Otherwise, set up the new state to swing + into action when the end of the matched substring is reached. */ + + else if (i + 1 >= active_count && new_count == 0) + { + ptr += charcount; + clen = 0; + ADD_NEW(next_state_offset, 0); + + /* If we are adding a repeat state at the new character position, + we must fudge things so that it is the only current state. + Otherwise, it might be a duplicate of one we processed before, and + that would cause it to be skipped. */ + + if (repeat_state_offset >= 0) + { + next_active_state = active_states; + active_count = 0; + i = -1; + ADD_ACTIVE(repeat_state_offset, 0); + } + } + else + { +#if defined SUPPORT_UTF && !defined COMPILE_PCRE32 + if (utf) + { + const pcre_uchar *p = start_subject + local_offsets[0]; + const pcre_uchar *pp = start_subject + local_offsets[1]; + while (p < pp) if (NOT_FIRSTCHAR(*p++)) charcount--; + } +#endif + ADD_NEW_DATA(-next_state_offset, 0, (charcount - 1)); + if (repeat_state_offset >= 0) + { ADD_NEW_DATA(-repeat_state_offset, 0, (charcount - 1)); } + } + } + else if (rc != PCRE_ERROR_NOMATCH) return rc; + } + break; + + +/* ========================================================================== */ + /* Handle callouts */ + + case OP_CALLOUT: + rrc = 0; + if (PUBL(callout) != NULL) + { + PUBL(callout_block) cb; + cb.version = 1; /* Version 1 of the callout block */ + cb.callout_number = code[1]; + cb.offset_vector = offsets; +#if defined COMPILE_PCRE8 + cb.subject = (PCRE_SPTR)start_subject; +#elif defined COMPILE_PCRE16 + cb.subject = (PCRE_SPTR16)start_subject; +#elif defined COMPILE_PCRE32 + cb.subject = (PCRE_SPTR32)start_subject; +#endif + cb.subject_length = (int)(end_subject - start_subject); + cb.start_match = (int)(current_subject - start_subject); + cb.current_position = (int)(ptr - start_subject); + cb.pattern_position = GET(code, 2); + cb.next_item_length = GET(code, 2 + LINK_SIZE); + cb.capture_top = 1; + cb.capture_last = -1; + cb.callout_data = md->callout_data; + cb.mark = NULL; /* No (*MARK) support */ + if ((rrc = (*PUBL(callout))(&cb)) < 0) return rrc; /* Abandon */ + } + if (rrc == 0) + { ADD_ACTIVE(state_offset + PRIV(OP_lengths)[OP_CALLOUT], 0); } + break; + + +/* ========================================================================== */ + default: /* Unsupported opcode */ + return PCRE_ERROR_DFA_UITEM; + } + + NEXT_ACTIVE_STATE: continue; + + } /* End of loop scanning active states */ + + /* We have finished the processing at the current subject character. If no + new states have been set for the next character, we have found all the + matches that we are going to find. If we are at the top level and partial + matching has been requested, check for appropriate conditions. + + The "forced_ fail" variable counts the number of (*F) encountered for the + character. If it is equal to the original active_count (saved in + workspace[1]) it means that (*F) was found on every active state. In this + case we don't want to give a partial match. + + The "could_continue" variable is true if a state could have continued but + for the fact that the end of the subject was reached. */ + + if (new_count <= 0) + { + if (rlevel == 1 && /* Top level, and */ + could_continue && /* Some could go on, and */ + forced_fail != workspace[1] && /* Not all forced fail & */ + ( /* either... */ + (md->moptions & PCRE_PARTIAL_HARD) != 0 /* Hard partial */ + || /* or... */ + ((md->moptions & PCRE_PARTIAL_SOFT) != 0 && /* Soft partial and */ + match_count < 0) /* no matches */ + ) && /* And... */ + ( + partial_newline || /* Either partial NL */ + ( /* or ... */ + ptr >= end_subject && /* End of subject and */ + ptr > md->start_used_ptr) /* Inspected non-empty string */ + ) + ) + match_count = PCRE_ERROR_PARTIAL; + DPRINTF(("%.*sEnd of internal_dfa_exec %d: returning %d\n" + "%.*s---------------------\n\n", rlevel*2-2, SP, rlevel, match_count, + rlevel*2-2, SP)); + break; /* In effect, "return", but see the comment below */ + } + + /* One or more states are active for the next character. */ + + ptr += clen; /* Advance to next subject character */ + } /* Loop to move along the subject string */ + +/* Control gets here from "break" a few lines above. We do it this way because +if we use "return" above, we have compiler trouble. Some compilers warn if +there's nothing here because they think the function doesn't return a value. On +the other hand, if we put a dummy statement here, some more clever compilers +complain that it can't be reached. Sigh. */ + +return match_count; +} + + + + +/************************************************* +* Execute a Regular Expression - DFA engine * +*************************************************/ + +/* This external function applies a compiled re to a subject string using a DFA +engine. This function calls the internal function multiple times if the pattern +is not anchored. + +Arguments: + argument_re points to the compiled expression + extra_data points to extra data or is NULL + subject points to the subject string + length length of subject string (may contain binary zeros) + start_offset where to start in the subject string + options option bits + offsets vector of match offsets + offsetcount size of same + workspace workspace vector + wscount size of same + +Returns: > 0 => number of match offset pairs placed in offsets + = 0 => offsets overflowed; longest matches are present + -1 => failed to match + < -1 => some kind of unexpected problem +*/ + +#if defined COMPILE_PCRE8 +PCRE_EXP_DEFN int PCRE_CALL_CONVENTION +pcre_dfa_exec(const pcre *argument_re, const pcre_extra *extra_data, + const char *subject, int length, int start_offset, int options, int *offsets, + int offsetcount, int *workspace, int wscount) +#elif defined COMPILE_PCRE16 +PCRE_EXP_DEFN int PCRE_CALL_CONVENTION +pcre16_dfa_exec(const pcre16 *argument_re, const pcre16_extra *extra_data, + PCRE_SPTR16 subject, int length, int start_offset, int options, int *offsets, + int offsetcount, int *workspace, int wscount) +#elif defined COMPILE_PCRE32 +PCRE_EXP_DEFN int PCRE_CALL_CONVENTION +pcre32_dfa_exec(const pcre32 *argument_re, const pcre32_extra *extra_data, + PCRE_SPTR32 subject, int length, int start_offset, int options, int *offsets, + int offsetcount, int *workspace, int wscount) +#endif +{ +REAL_PCRE *re = (REAL_PCRE *)argument_re; +dfa_match_data match_block; +dfa_match_data *md = &match_block; +BOOL utf, anchored, startline, firstline; +const pcre_uchar *current_subject, *end_subject; +const pcre_study_data *study = NULL; + +const pcre_uchar *req_char_ptr; +const pcre_uint8 *start_bits = NULL; +BOOL has_first_char = FALSE; +BOOL has_req_char = FALSE; +pcre_uchar first_char = 0; +pcre_uchar first_char2 = 0; +pcre_uchar req_char = 0; +pcre_uchar req_char2 = 0; +int newline; + +/* Plausibility checks */ + +if ((options & ~PUBLIC_DFA_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; +if (re == NULL || subject == NULL || workspace == NULL || + (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; +if (offsetcount < 0) return PCRE_ERROR_BADCOUNT; +if (wscount < 20) return PCRE_ERROR_DFA_WSSIZE; +if (length < 0) return PCRE_ERROR_BADLENGTH; +if (start_offset < 0 || start_offset > length) return PCRE_ERROR_BADOFFSET; + +/* Check that the first field in the block is the magic number. If it is not, +return with PCRE_ERROR_BADMAGIC. However, if the magic number is equal to +REVERSED_MAGIC_NUMBER we return with PCRE_ERROR_BADENDIANNESS, which +means that the pattern is likely compiled with different endianness. */ + +if (re->magic_number != MAGIC_NUMBER) + return re->magic_number == REVERSED_MAGIC_NUMBER? + PCRE_ERROR_BADENDIANNESS:PCRE_ERROR_BADMAGIC; +if ((re->flags & PCRE_MODE) == 0) return PCRE_ERROR_BADMODE; + +/* If restarting after a partial match, do some sanity checks on the contents +of the workspace. */ + +if ((options & PCRE_DFA_RESTART) != 0) + { + if ((workspace[0] & (-2)) != 0 || workspace[1] < 1 || + workspace[1] > (wscount - 2)/INTS_PER_STATEBLOCK) + return PCRE_ERROR_DFA_BADRESTART; + } + +/* Set up study, callout, and table data */ + +md->tables = re->tables; +md->callout_data = NULL; + +if (extra_data != NULL) + { + unsigned long int flags = extra_data->flags; + if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) + study = (const pcre_study_data *)extra_data->study_data; + if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) return PCRE_ERROR_DFA_UMLIMIT; + if ((flags & PCRE_EXTRA_MATCH_LIMIT_RECURSION) != 0) + return PCRE_ERROR_DFA_UMLIMIT; + if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) + md->callout_data = extra_data->callout_data; + if ((flags & PCRE_EXTRA_TABLES) != 0) + md->tables = extra_data->tables; + } + +/* Set some local values */ + +current_subject = (const pcre_uchar *)subject + start_offset; +end_subject = (const pcre_uchar *)subject + length; +req_char_ptr = current_subject - 1; + +#ifdef SUPPORT_UTF +/* PCRE_UTF(16|32) have the same value as PCRE_UTF8. */ +utf = (re->options & PCRE_UTF8) != 0; +#else +utf = FALSE; +#endif + +anchored = (options & (PCRE_ANCHORED|PCRE_DFA_RESTART)) != 0 || + (re->options & PCRE_ANCHORED) != 0; + +/* The remaining fixed data for passing around. */ + +md->start_code = (const pcre_uchar *)argument_re + + re->name_table_offset + re->name_count * re->name_entry_size; +md->start_subject = (const pcre_uchar *)subject; +md->end_subject = end_subject; +md->start_offset = start_offset; +md->moptions = options; +md->poptions = re->options; + +/* If the BSR option is not set at match time, copy what was set +at compile time. */ + +if ((md->moptions & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) == 0) + { + if ((re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE)) != 0) + md->moptions |= re->options & (PCRE_BSR_ANYCRLF|PCRE_BSR_UNICODE); +#ifdef BSR_ANYCRLF + else md->moptions |= PCRE_BSR_ANYCRLF; +#endif + } + +/* Handle different types of newline. The three bits give eight cases. If +nothing is set at run time, whatever was used at compile time applies. */ + +switch ((((options & PCRE_NEWLINE_BITS) == 0)? re->options : (pcre_uint32)options) & + PCRE_NEWLINE_BITS) + { + case 0: newline = NEWLINE; break; /* Compile-time default */ + case PCRE_NEWLINE_CR: newline = CHAR_CR; break; + case PCRE_NEWLINE_LF: newline = CHAR_NL; break; + case PCRE_NEWLINE_CR+ + PCRE_NEWLINE_LF: newline = (CHAR_CR << 8) | CHAR_NL; break; + case PCRE_NEWLINE_ANY: newline = -1; break; + case PCRE_NEWLINE_ANYCRLF: newline = -2; break; + default: return PCRE_ERROR_BADNEWLINE; + } + +if (newline == -2) + { + md->nltype = NLTYPE_ANYCRLF; + } +else if (newline < 0) + { + md->nltype = NLTYPE_ANY; + } +else + { + md->nltype = NLTYPE_FIXED; + if (newline > 255) + { + md->nllen = 2; + md->nl[0] = (newline >> 8) & 255; + md->nl[1] = newline & 255; + } + else + { + md->nllen = 1; + md->nl[0] = newline; + } + } + +/* Check a UTF-8 string if required. Unfortunately there's no way of passing +back the character offset. */ + +#ifdef SUPPORT_UTF +if (utf && (options & PCRE_NO_UTF8_CHECK) == 0) + { + int erroroffset; + int errorcode = PRIV(valid_utf)((pcre_uchar *)subject, length, &erroroffset); + if (errorcode != 0) + { + if (offsetcount >= 2) + { + offsets[0] = erroroffset; + offsets[1] = errorcode; + } +#if defined COMPILE_PCRE8 + return (errorcode <= PCRE_UTF8_ERR5 && (options & PCRE_PARTIAL_HARD) != 0) ? + PCRE_ERROR_SHORTUTF8 : PCRE_ERROR_BADUTF8; +#elif defined COMPILE_PCRE16 + return (errorcode <= PCRE_UTF16_ERR1 && (options & PCRE_PARTIAL_HARD) != 0) ? + PCRE_ERROR_SHORTUTF16 : PCRE_ERROR_BADUTF16; +#elif defined COMPILE_PCRE32 + return PCRE_ERROR_BADUTF32; +#endif + } +#if defined COMPILE_PCRE8 || defined COMPILE_PCRE16 + if (start_offset > 0 && start_offset < length && + NOT_FIRSTCHAR(((PCRE_PUCHAR)subject)[start_offset])) + return PCRE_ERROR_BADUTF8_OFFSET; +#endif + } +#endif + +/* If the exec call supplied NULL for tables, use the inbuilt ones. This +is a feature that makes it possible to save compiled regex and re-use them +in other programs later. */ + +if (md->tables == NULL) md->tables = PRIV(default_tables); + +/* The "must be at the start of a line" flags are used in a loop when finding +where to start. */ + +startline = (re->flags & PCRE_STARTLINE) != 0; +firstline = (re->options & PCRE_FIRSTLINE) != 0; + +/* Set up the first character to match, if available. The first_byte value is +never set for an anchored regular expression, but the anchoring may be forced +at run time, so we have to test for anchoring. The first char may be unset for +an unanchored pattern, of course. If there's no first char and the pattern was +studied, there may be a bitmap of possible first characters. */ + +if (!anchored) + { + if ((re->flags & PCRE_FIRSTSET) != 0) + { + has_first_char = TRUE; + first_char = first_char2 = (pcre_uchar)(re->first_char); + if ((re->flags & PCRE_FCH_CASELESS) != 0) + { + first_char2 = TABLE_GET(first_char, md->tables + fcc_offset, first_char); +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + if (utf && first_char > 127) + first_char2 = UCD_OTHERCASE(first_char); +#endif + } + } + else + { + if (!startline && study != NULL && + (study->flags & PCRE_STUDY_MAPPED) != 0) + start_bits = study->start_bits; + } + } + +/* For anchored or unanchored matches, there may be a "last known required +character" set. */ + +if ((re->flags & PCRE_REQCHSET) != 0) + { + has_req_char = TRUE; + req_char = req_char2 = (pcre_uchar)(re->req_char); + if ((re->flags & PCRE_RCH_CASELESS) != 0) + { + req_char2 = TABLE_GET(req_char, md->tables + fcc_offset, req_char); +#if defined SUPPORT_UCP && !(defined COMPILE_PCRE8) + if (utf && req_char > 127) + req_char2 = UCD_OTHERCASE(req_char); +#endif + } + } + +/* Call the main matching function, looping for a non-anchored regex after a +failed match. If not restarting, perform certain optimizations at the start of +a match. */ + +for (;;) + { + int rc; + + if ((options & PCRE_DFA_RESTART) == 0) + { + const pcre_uchar *save_end_subject = end_subject; + + /* If firstline is TRUE, the start of the match is constrained to the first + line of a multiline string. Implement this by temporarily adjusting + end_subject so that we stop scanning at a newline. If the match fails at + the newline, later code breaks this loop. */ + + if (firstline) + { + PCRE_PUCHAR t = current_subject; +#ifdef SUPPORT_UTF + if (utf) + { + while (t < md->end_subject && !IS_NEWLINE(t)) + { + t++; + ACROSSCHAR(t < end_subject, *t, t++); + } + } + else +#endif + while (t < md->end_subject && !IS_NEWLINE(t)) t++; + end_subject = t; + } + + /* There are some optimizations that avoid running the match if a known + starting point is not found. However, there is an option that disables + these, for testing and for ensuring that all callouts do actually occur. + The option can be set in the regex by (*NO_START_OPT) or passed in + match-time options. */ + + if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0) + { + /* Advance to a known first pcre_uchar (i.e. data item) */ + + if (has_first_char) + { + if (first_char != first_char2) + { + pcre_uchar csc; + while (current_subject < end_subject && + (csc = UCHAR21TEST(current_subject)) != first_char && csc != first_char2) + current_subject++; + } + else + while (current_subject < end_subject && + UCHAR21TEST(current_subject) != first_char) + current_subject++; + } + + /* Or to just after a linebreak for a multiline match if possible */ + + else if (startline) + { + if (current_subject > md->start_subject + start_offset) + { +#ifdef SUPPORT_UTF + if (utf) + { + while (current_subject < end_subject && + !WAS_NEWLINE(current_subject)) + { + current_subject++; + ACROSSCHAR(current_subject < end_subject, *current_subject, + current_subject++); + } + } + else +#endif + while (current_subject < end_subject && !WAS_NEWLINE(current_subject)) + current_subject++; + + /* If we have just passed a CR and the newline option is ANY or + ANYCRLF, and we are now at a LF, advance the match position by one + more character. */ + + if (UCHAR21TEST(current_subject - 1) == CHAR_CR && + (md->nltype == NLTYPE_ANY || md->nltype == NLTYPE_ANYCRLF) && + current_subject < end_subject && + UCHAR21TEST(current_subject) == CHAR_NL) + current_subject++; + } + } + + /* Advance to a non-unique first pcre_uchar after study */ + + else if (start_bits != NULL) + { + while (current_subject < end_subject) + { + register pcre_uint32 c = UCHAR21TEST(current_subject); +#ifndef COMPILE_PCRE8 + if (c > 255) c = 255; +#endif + if ((start_bits[c/8] & (1 << (c&7))) != 0) break; + current_subject++; + } + } + } + + /* Restore fudged end_subject */ + + end_subject = save_end_subject; + + /* The following two optimizations are disabled for partial matching or if + disabling is explicitly requested (and of course, by the test above, this + code is not obeyed when restarting after a partial match). */ + + if (((options | re->options) & PCRE_NO_START_OPTIMIZE) == 0 && + (options & (PCRE_PARTIAL_HARD|PCRE_PARTIAL_SOFT)) == 0) + { + /* If the pattern was studied, a minimum subject length may be set. This + is a lower bound; no actual string of that length may actually match the + pattern. Although the value is, strictly, in characters, we treat it as + in pcre_uchar units to avoid spending too much time in this optimization. + */ + + if (study != NULL && (study->flags & PCRE_STUDY_MINLEN) != 0 && + (pcre_uint32)(end_subject - current_subject) < study->minlength) + return PCRE_ERROR_NOMATCH; + + /* If req_char is set, we know that that pcre_uchar must appear in the + subject for the match to succeed. If the first pcre_uchar is set, + req_char must be later in the subject; otherwise the test starts at the + match point. This optimization can save a huge amount of work in patterns + with nested unlimited repeats that aren't going to match. Writing + separate code for cased/caseless versions makes it go faster, as does + using an autoincrement and backing off on a match. + + HOWEVER: when the subject string is very, very long, searching to its end + can take a long time, and give bad performance on quite ordinary + patterns. This showed up when somebody was matching /^C/ on a 32-megabyte + string... so we don't do this when the string is sufficiently long. */ + + if (has_req_char && end_subject - current_subject < REQ_BYTE_MAX) + { + register PCRE_PUCHAR p = current_subject + (has_first_char? 1:0); + + /* We don't need to repeat the search if we haven't yet reached the + place we found it at last time. */ + + if (p > req_char_ptr) + { + if (req_char != req_char2) + { + while (p < end_subject) + { + register pcre_uint32 pp = UCHAR21INCTEST(p); + if (pp == req_char || pp == req_char2) { p--; break; } + } + } + else + { + while (p < end_subject) + { + if (UCHAR21INCTEST(p) == req_char) { p--; break; } + } + } + + /* If we can't find the required pcre_uchar, break the matching loop, + which will cause a return or PCRE_ERROR_NOMATCH. */ + + if (p >= end_subject) break; + + /* If we have found the required pcre_uchar, save the point where we + found it, so that we don't search again next time round the loop if + the start hasn't passed this point yet. */ + + req_char_ptr = p; + } + } + } + } /* End of optimizations that are done when not restarting */ + + /* OK, now we can do the business */ + + md->start_used_ptr = current_subject; + md->recursive = NULL; + + rc = internal_dfa_exec( + md, /* fixed match data */ + md->start_code, /* this subexpression's code */ + current_subject, /* where we currently are */ + start_offset, /* start offset in subject */ + offsets, /* offset vector */ + offsetcount, /* size of same */ + workspace, /* workspace vector */ + wscount, /* size of same */ + 0); /* function recurse level */ + + /* Anything other than "no match" means we are done, always; otherwise, carry + on only if not anchored. */ + + if (rc != PCRE_ERROR_NOMATCH || anchored) + { + if (rc == PCRE_ERROR_PARTIAL && offsetcount >= 2) + { + offsets[0] = (int)(md->start_used_ptr - (PCRE_PUCHAR)subject); + offsets[1] = (int)(end_subject - (PCRE_PUCHAR)subject); + if (offsetcount > 2) + offsets[2] = (int)(current_subject - (PCRE_PUCHAR)subject); + } + return rc; + } + + /* Advance to the next subject character unless we are at the end of a line + and firstline is set. */ + + if (firstline && IS_NEWLINE(current_subject)) break; + current_subject++; +#ifdef SUPPORT_UTF + if (utf) + { + ACROSSCHAR(current_subject < end_subject, *current_subject, + current_subject++); + } +#endif + if (current_subject > end_subject) break; + + /* If we have just passed a CR and we are now at a LF, and the pattern does + not contain any explicit matches for \r or \n, and the newline option is CRLF + or ANY or ANYCRLF, advance the match position by one more character. */ + + if (UCHAR21TEST(current_subject - 1) == CHAR_CR && + current_subject < end_subject && + UCHAR21TEST(current_subject) == CHAR_NL && + (re->flags & PCRE_HASCRORLF) == 0 && + (md->nltype == NLTYPE_ANY || + md->nltype == NLTYPE_ANYCRLF || + md->nllen == 2)) + current_subject++; + + } /* "Bumpalong" loop */ + +return PCRE_ERROR_NOMATCH; +} + +/* End of pcre_dfa_exec.c */ -- cgit v1.1