path: root/doc/refman.tex

\documentclass[11pt,twoside]{book}
\usepackage{a4wide}
\usepackage{html}
\usepackage{makeidx}
\usepackage{graphicx}


\newcommand{\cident}[1] {%
  {\tt #1}}

\newcommand{\code}[1] {%
  {\tt #1}}

\newcommand{\ident}[1] {%
  {\tt\large #1}}

\newenvironment{blockindent}{\begin{quotation}}{\end{quotation}\vspace{\parskip}}

\newcommand{\option}[3]{%
  \label{opt:#1}
  \index{#1}
  \htmlrule[WIDTH="300" left]
  \begin{tabular}{rl}
    Command line switch: & \ident{-#1} \\
    Database name: & \ident{#2} \\
    Database class: & \ident{#3} \\
  \end{tabular}}

\newcommand{\command}[3]{%
  \label{cmd:#2}
  \index{#2}
  \htmlrule[WIDTH="300" left]
  {\tt\large #1 {\bf #2} #3}}

\newcommand{\zinccmd}[2]{%
  \command{pathname}{#1}{#2}}

\newcommand{\mapinfocmd}[3]{%
  \label{mpcmd:#2}
  \index{#2}
  \htmlrule[WIDTH="300" left]
  {\tt\large mapinfo #1 {\bf #2} #3}}

\newcommand{\attrtype}[1]{%
  \label{attrtype:#1}
  \index{#1}
  \htmlrule[WIDTH="300" left]
  {\tt {\bf #1}}
  \vspace{-2\parskip}}

\newcommand{\available}[1]{%
  \hyperref[page]{\ident{#1}}{\ident{#1} (}{)}{obj:#1}}

\newcommand{\optref}[1]{%
  \hyperref[page]{\ident{#1}}{\ident{#1} (}{)}{opt:#1}
  }

\newcommand{\cmdref}[1]{%
  \index{#1}
  \hyperref[page]{\ident{#1}}{\ident{#1} (}{)}{cmd:#1}
  }

\newcommand{\attribute}[3]{%
  \ident{-#1} \hyperref[no]{\tt \bf #2}{\ident{#1}}{attrtype:#2}
  \begin{quotation}#3\end{quotation}
  }

\newcommand{\object}[1]{%
  \label{obj:#1}
  }

\newcommand{\concept}[1]{%
  \label{concept:#1}
  }

\newcommand{\objectref}[1]{%
  \hyperref[page]{\ident{#1}}{\ident{#1} (}{)}{obj:#1}
  }

\newcommand{\conceptref}[2]{%
  \hyperref[page]{#1}{#1 (page }{)}{concept:#2}
  }



\makeindex

\parindent 0cm
\parskip 0.2cm

\title{Zinc reference manual\\Version 3.0}
\author{Patrick Lecoanet}
\date{21 Sep 2000}


\begin{document}

\maketitle

This reference manual describes the Tk \ident{zinc} widget interface. It shows
how to create and configure a \ident{zinc} widget, and how to use the commands
it provides to create and manipulate items.

The \ident{zinc} widget is available for the Tcl/Tk and the Perl/Tk environment.
A binding over Tcl/Tk is also provided for Python. This document is Tcl/Tk
oriented but it should be easy for Perl and Python programmers to adapt.

The \ident{zinc} command creates a new \ident{zinc} widget, the general form is
\begin{quotation}
  {\tt zinc pathname ?options?}
\end{quotation}
{\tt pathname} name the new widget and specifies where in the widget hierarchy
it will be located. Any number of options may be specified on the command line
or in the option database to modify the global behavior of the widget. Available
options are described in the \ident{Widget options} chapter.

\ident{Zinc} widgets are very similar to Tk \ident{canvas}es in that they support
structured graphics. Like the \ident{canvas}, \ident{zinc} implements items used to
display graphical entities. Those items can be manipulated and bindings can be
associated with them to implement interaction behaviors. But unlike the \ident{canvas},
\ident{zinc} can structure the items in a hierarchy, has support for affine 2D
transforms, clipping can be set for sub-trees of the item hierarchy and the item
set is quite more powerful including field specific items for Air Traffic systems.



\chapter{Widget options}
\concept{options}
\option{borderwidth}{borderWidth}{BorderWidth}
\begin{blockindent}
  Specifies the width of the 3d border that should be displayed around the widget
  window. This border does not overlap the active zinc display area. The area
  requested from the geometry manager (or the window manager if applicable)
  is the overall area, display area plus borders. This value can be given
  in any of the forms valid for coordinates (See \cident{TkGet\_Pixels}).
  The default value is 2.
\end{blockindent}

\option{backcolor}{backColor}{BackColor}
\begin{blockindent}
  This the color that will be used to fill the zinc window. It is also
  used as a default color for some item attributes of type color. See each
  color attribute for the actual source of the default color. Its default
  value is white.
\end{blockindent}

\option{cursor}{cursor}{Cursor}
\begin{blockindent}
  Specifies the cursor to use when the pointer is in the zinc window.
  The default value is set to preserve the cursor provided at widget
  creation.
\end{blockindent}

\option{font}{font}{Font}
\begin{blockindent}
  The font specified by this option is used as a default font
  for item attributes of type font. Its default value is
  -adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*.
\end{blockindent}

\option{forecolor}{foreColor}{ForeColor}
\begin{blockindent}
  The color specified by this option is used as a default color
  for many item attributes of type color. See each each color
  attribute for the actual source of the default color. Its
  default value is black.
\end{blockindent}

\option{fullreshape}{fullReshape}{FullReshape}
\begin{blockindent}
  If this option is True, the shape applied to the zinc window will
  propagate up the window hierarchy to the top level window. The
  result will be a shaped top level. See also the \optref{reshape} option,
  it controls whether a shape is applied to the zinc window or not.
  The default is True.
\end{blockindent}

\option{height}{height}{Height}
\begin{blockindent}
  Specifies the height of the actual zinc area (i.e, this dimension
  does not include the border width). This value can be given in any of
  the forms valid for coordinates (See \cident{Tk\_GetPixels}). The default is
  100 pixels.
\end{blockindent}

\option{highlightbackground}{highlightBackground}{HighlightBackground}
\begin{blockindent}
  Specifies the color to display in the traversal highlight region when the
  widget does not have the input focus. The default value is \#c3c3c3.
\end{blockindent}

\option{highlightcolor}{highlightColor}{HighlightColor}
\begin{blockindent}
  Specifies the color to use for the traversal highlight rectangle that is
  drawn around the widget when it has the input focus. The default value
  is Black.
\end{blockindent}

\option{highlightthickness}{highlightThickness}{HighlightThickness}
\begin{blockindent}
  Specifies a non-negative value indicating the width of the highlight
  rectangle drawn around the outside of the widget when it has the input
  focus. The value may have any of the forms acceptable to \cident{Tk\_GetPixels}.
  If the value is zero, no focus highlight is drawn around the widget.
  The default value is 2.
\end{blockindent}

\option{insertbackground}{insertBackground}{InsertBackground}
\begin{blockindent}
  Specifies the color to use as background in the area covered by the
  insertion cursor. This color will normally override either the normal
  background for the widget (or the selection background if the insertion
  cursor happens to fall in the selection). The default value is Black.
\end{blockindent}

\option{insertofftime}{insertOffTime}{InsertOffTime}
\begin{blockindent}
  Specifies a non-negative integer value indicating the number of
  milliseconds the insertion cursor should remain off in each blink cycle.
  If this option is zero then the cursor is on all the time. The
  default value is 300.
\end{blockindent}

\option{insertontime}{insertOnTime}{InsertOnTime}
\begin{blockindent}
  Specifies a non-negative integer value indicating the number of
  milliseconds the insertion cursor should remain on in each blink cycle.
  The default value is 600.
\end{blockindent}

\option{insertwidth}{insertWidth}{InsertWidth}
\begin{blockindent}
  Specifies a value indicating the width of the insertion cursor.
  The value may have any of the forms acceptable to \cident{Tk\_GetPixels}.
  The default value is 2.
\end{blockindent}

\option{mapdistancesymbol}{mapDistanceSymbol}{MapDistanceSymbol}
\begin{blockindent}
  This option specifies the symbol to be used as a milestone
  along map lines. This option can be given any Tk bitmap which
  can be obtained by \cident{Tk\_GetBitmap}. The spacing between markers is
  10 nautic miles. The default value is AtcSymbol19.
\end{blockindent}

\option{maptextfont}{mapTextFont}{MapTextFont}
\begin{blockindent}
  Specifies the font used to draw the texts contained in maps. The
  default is -adobe-helvetica-bold-r-normal--*-120-*-*-*-*-*-*.
\end{blockindent}

\option{overlapmanager}{overlapManager}{OverlapManager}
\begin{blockindent}
  This option accepts an item id. It specifies if the label overlapping
  avoidance algorithm should be allowed to do its work on the track labels
  and which group should be considered to look for tracks. The default
  is to enable the avoidance algorithm in the top group (id 1).
\end{blockindent}

\option{pickaperture}{pickAperture}{PickAperture}
\begin{blockindent}
  Specifies the size of an area around the pointer that is used to tell
  if the pointer is inside an item. This is useful to lessen the precision
  required when picking graphical elements. This value must be a positive
  integer. It defaults to 1.
\end{blockindent}

\option{relief}{relief}{Relief}
\begin{blockindent}
  Specifies the border relief. This option can be given any legal value
  for a relief (See \cident{Tk\_GetRelief} for a description of possible values).
\end{blockindent}

\option{reshape}{reshape}{Reshape}
\begin{blockindent}
  Specifies if the clipping shape that can be set in the top group item
  should clip the top group children or be used to reshape the zinc
  window. This option can be used with the fullreshape option to reshape
  the toplevel window as well. The default value is True.
\end{blockindent}

\option{selectbackground}{selectBackground}{SelectBackground}
\begin{blockindent}
  Specifies the background color to use for displaying the selection
  in text items. The default value is \#a0a0a0.
\end{blockindent}

\option{speedvectorlength}{speedVectorLength}{SpeedVectorLength}
\begin{blockindent}
  Specifies the duration of track speed vectors. This option is expressed
  using a time unit that should be chosen by the application (often minutes)
  and kept coherent with the unit of the track attribute \ident{speedvector}
  (often nautic mile / minutes). The default value is 3.
\end{blockindent}

\option{takefocus}{takeFocus}{TakeFocus}
\begin{blockindent}
  (From the Tk options manpage).
  
  Determines whether the window accepts the focus during keyboard traversal
  (e.g., Tab and Shift-Tab). Before setting the focus to a window, the
  traversal scripts consult the value of the takeFocus option. A value of 0
  means that the window should be skipped entirely during keyboard traversal.
  1 means that the window should receive the input focus as long as it is
  viewable (it and all of its ancestors are mapped). An empty value for the
  option means that the traversal scripts make the decision about whether or
  not to focus on the window: the current algorithm is to skip the window if
  it is disabled, if it has no key bindings, or if it is not viewable. If the
  value has any other form, then the traversal scripts take the value, append
  the name of the window to it (with a separator space), and evaluate the
  resulting string as a Tcl script. The script must return 0, 1, or an empty
  string: a 0 or 1 value specifies whether the window will receive the input
  focus, and an empty string results in the default decision described above.
  Note: this interpretation of the option is defined entirely by the Tcl scripts
  that implement traversal: the widget implementations ignore the option
  entirely, so you can change its meaning if you redefine the keyboard traversal
  scripts. The default value is empty.
\end{blockindent}

\option{tile}{tile}{Tile}
\begin{blockindent}
  Specifies an image name to be used as a tile for painting the zinc window
  background. The default value is none (the empty string).
\end{blockindent}

\option{trackmanagedhistorysize}{trackManagedHistorySize}{TrackManagedHistorySize}
\begin{blockindent}
  This option accepts only positive integers. It specifies the size of
  the past position list that can be maintained by the track items. See
  also the \optref{trackmanagehistory} option and the \ident{visiblehistorysize}
  track attribute. The default value is 6.
\end{blockindent}


\option{trackmanagehistory}{trackManageHistory}{TrackManageHistory}
\begin{blockindent}
  This option accepts any form valid for a boolean. It specifies if
  the track items should maintain a list of their past positions to be
  displayed as trailing speckles. If this option is turned off and then
  back on, the history list is erased and the collection is resumed at
  the next available position. The number of position collected in the
  history list is specified by the option \optref{trackmanagedhistorysize}.
  When this many positions are collected, the oldest is dropped to make
  room for the new one on a first in first out basis. The number of past
  positions actually displayed if specified for each track by the
  attribute \ident{visiblehistorysize}.
  The default is to enable the history collection.
\end{blockindent}


\option{width}{width}{Width}
\begin{blockindent}
  Specifies the width of the actual zinc area (i.e, this dimension
  does not include the border width). This value can be given in any of
  the forms valid for coordinates (See \cident{Tk\_GetPixels}). The default is
  100 pixels.
\end{blockindent}


\chapter{Groups, Display List and Transformations}
\concept{coordinates}
la liaison groupe transformation
l'empilage des groupes et la composition de transfo
coordonnées du top group


\chapter{Item IDs and Tags}
\concept{tagOrId}
id
tag all
tag current
tags speciaux dans les items textes
tags
tags dans bind (syntaxe pour spécifier les parties et les champs).

Décrire les ids, tags, field tags et part tags. Les deux derniers
n'étant employes que par bind doit-on les décrire ici ou dans la commande ?
Parler de current, all.


\chapter{Indices}


\chapter{Widget commands}

The available commands are listed in alphabetical order.

The command set for the \ident{zinc} widget is much inspired by the \ident{canvas}
command set. Someone comfortable with the \ident{canvas} should not have much trouble
using the \ident{zinc}'s commands. Eventually, the command set will be a superset
of the \ident{canvas} command set.

\vspace{.5cm}  
\zinccmd{add}{?type group? ?args? ?option value? ... ?option? value?}
\begin{blockindent}
  This command is used to create new items in a zinc widget. It can be called with
  no parameters to return the list of all item types currently known by
  the zinc widget. It can also be called with a valid item type as first
  parameter and a group item as second parameter to create a new item of this
  type in the given group.

  After these first two parameters come some item type specific arguments.
  Here is detailed description of these arguments by type:
  \begin{description}
  \item{arc} \\
    The arc type expects a list of four floating point numbers ``xo yo xc yc'',
    giving the coordinates of the origin and the corner of the enclosing rectangle.
  \item{bezier} \\
    The bezier type expects a list of floating point numbers ``x0 y0 x1 y1 ... xn yn'',
    giving the coordinates of the bezier segment controls. The number of values
    should be pair (or the last value will be discarded), and there should be at
    least two control points. The segments are built as follow: if there is at
    least four points, they are used as the four controls of a cubic Bezier. Then,
    if more than four points are provided , the first three are discarded and
    the process is restarted using as first control the last control of the previous
    segment. The process is repeated until there is less than four points left.
    If three points are left, a segment is drawn using the second point for the
    two off-curve controls. If two points are left, a line segment is drawn
    between the two.
  \item{curve} \\
    The curve type expects a list of floating point numbers ``x0 y0 x1 y1 ... xn yn'',
    giving the coordinates of the curve vertices. The number of values should be
    pair (or the last value will be discarded) but the list can be empty to build
    an empty invisible curve. This curve can be defined later with the \cmdref{contour}
    or \cmdref{coords} commands. As a side effect of the curve behavior, a one vertex
    curve is essentially the same as an empty curve, it only waste some more memory.
  \item{rectangle} \\
    The rectangle type expects a list of four floating point numbers ``xo yo xc yc'',
    giving the coordinates of the origin and the corner of the rectangle.
  \item{tabular, track, waypoint} \\
    These types expects the number of fields they will manage in the label or
    tabular form. This number must be greater or equal to zero.
  \item{group, icon, map, reticle, text, window} \\
    These types doesn't expect type specific arguments.
  \end{description}
  
  Following the creation args the command accept any number of
  attributes\ -\ values pairs to configure the newly created item.
  All the configurable item type attributes are valid in this context. The
  command returns the item id.
\end{blockindent}

\zinccmd{addtag}{tag searchSpec ?arg arg ...?}
\begin{blockindent}
  This command add the given tag to all items matching the
  search specification. If the tag is already present on some item,
  nothing is done for that item. The command has no effect if no
  item satisfy the given criteria. The command returns an empty
  string. The search specification and the associated arguments can
  take the following forms:
  \begin{description}
  \item{\tt above tagOrId ?inGroup? ?recursive?} \\
    Selects the item just above the one given by {\tt tagOrId}. If
    {\tt tagOrId} names more than one item, the topmost of these
    items in the display list will be used. If {\tt tagOrId} does
    not refer to any item then nothing happen. The inGroup and
    recursive optional parameters can be specified to restrict the
    search with a tag matching several items. inGroup specifies a
    group to start with instead of the top group and recursive
    tells if the search should descend in the item tree or not.

  \item{\tt all ?inGroup? ?recursive?} \\
    Selects all the items in the widget. The inGroup and
    recursive can be specified to restrict the search. inGroup specifies
    a group to start with instead of the top group and recursive tells
    if the search should descend in the item tree or not.

  \item{\tt atpriority priority ?inGroup? ?recursive?} \\
    Selects all the items at the given priority. The inGroup and
    recursive can be specified to restrict the search. inGroup specifies
    a group to start with instead of the top group and recursive tells
    if the search should descend in the item tree or not.

  \item{\tt below tagOrId ?inGroup? ?recursive?} \\
    Selects the item just below the one given by {\tt tagOrId}. If
    {\tt tagOrId} names more than one item, the lowest of these
    items in the display list will be used. If {\tt tagOrId} does
    not refer to any item then nothing happen. The inGroup and
    recursive optional parameters can be specified to restrict the
    search with a tag matching several items. inGroup specifies a
    group to start with instead of the top group and recursive
    tells if the search should descend in the item tree or not.

  \item{\tt closest x y ?halo? ?start?} \\
    Selects the item closest to the point {\tt x - y}. Any item overlapping
    the point is considered as closest and the topmost is selected. If {\tt halo}
    is given, it defines the size of the point {\tt x - y}. {\tt halo} must
    be a non negative integer. If {\tt start} is specified, it must be
    an item tag or id. If it names a valid item (for a tag, the lowest
    item with the tag is considered), the search starts with the item
    below {\tt start} instead of the first item in the display
    order. If {\tt start} does not name a valid item, it is ignored.

  \item{\tt enclosed xo yo xc yc} \\
    Selects all the items completely enclosed in the rectangle whose
    origin is at {\tt xo - yo} and corner at {\tt xc - yc}. {\tt xc}
    must be no greater than {\tt xo} and {\tt yo} must be no greater
    than {\tt yc}. All coordinates must be integers.

  \item{\tt overlapping xo yo xc yc} \\
    Selects all the items that overlaps or are enclosed in the rectangle
    whose origin is at {\tt xo - yo} and corner at {\tt xc - yc}. {\tt xc}
    must be no greater than {\tt xo} and {\tt yo} must be no greater than
    {\tt yc}. All coordinates must be integers.

  \item{\tt withtag tagOrId ?inGroup? ?recursive?} \\
    Selects all the items given by {\tt tagOrId}. The inGroup and
    recursive can be specified to restrict the search. inGroup specifies
    a group to start with instead of the top group and recursive tells
    if the search should descend in the item tree or not.

  \item{\tt withtype type ?inGroup? ?recursive?} \\
    Selects all the items of type {\tt type}. The inGroup and
    recursive can be specified to restrict the search. inGroup specifies
    a group to start with instead of the top group and recursive tells
    if the search should descend in the item tree or not.
  \end{description}
\end{blockindent}

\zinccmd{anchorxy}{tagOrId anchor}
\begin{blockindent}
  Returns the (device) coordinate of an item anchor. If no item is
  named by {\tt tagOrId} or if the item doesn't support anchors, an
  error is raised. If more than one item match {\tt tagOrId}, the topmost
  in display list order is used.
\end{blockindent}

\zinccmd{bbox}{tagOrId ?tagOrId ...?}
\begin{blockindent}
  Returns a list of 4 numbers describing the (device) coordinates of the origin
  and corner of a rectangle bounding all the items named by the {\tt tagOrId}
  arguments. If no items are named by the {\tt tagOrId} or if the matching items
  have an empty bounding box, an empty string is returned.
\end{blockindent}

\zinccmd{becomes}{}
\begin{blockindent}
  Not yet implemented.
\end{blockindent}

\zinccmd{bind}{tagOrId ?sequence? ?command?}
\begin{blockindent}
  This command associates {\tt command} with the item tag, item id, part tag
  {\tt tagOrId}. If an event sequence matching {\tt sequence}
  occurs for an item, or an item part, the command will be invoked.
  If all parameters are specified a new binding between {\tt sequence} and
  {\tt command} is established, overriding any existing binding for the
  sequence. If the first character of {\tt command} is ``+'', then
  {\tt command} augments the existing binding instead of replacing it.
  In this case the command returns an empty string. If the {\tt command}
  parameter is omitted, the command return the {\tt command} associated
  with {\tt tagOrId} and {\tt sequence} or an error is raised if there
  is no such binding. If only {\tt tagOrId} is specified the command
  returns a list of all the sequences for which there are bindings for
  {\tt tagOrId}.
  
  This widget command is similar to the \ident{bind} command except that
  it operates on \ident{zinc} items instead of widgets. Another difference
  with the \ident{bind} command is that only mouse and keyboard related events
  can be specified (such as \ident{Enter}, \ident{Leave}, \ident{ButtonPress},
  \ident{ButtonRelease}, \ident{Motion}, \ident{KeyPress}, \ident{KeyRelease}).
  The \ident{bind} manual page is the most accurate place to look for a
  definition of {\tt sequence} and {\tt command} and for a general understanding
  of how the binding mecanism works.

  The handling of events in the widget is done with respect to the
  current item and when applicable the current item part (see
  \conceptref{Item IDs and tags}{tagOrId} for a discussion of the
  \ident{current} tag and the special tags used in bindings). \ident{Enter}
  and \ident{Leave} events are trigerred for an item when it becomes or cease
  to be the current item. Mouse related events are reported with respect to
  the current item. Keyboard related events are reported with respect to the
  focus item (which can be the current item or none).

  It is possible that several bindings match a particular event sequence.
  When this occurs, all matching bindings are triggered. The order of
  invocation is as follow: the binding associated with the tag \ident{all}
  is invoked first, followed by the bindings associated with the item tags
  in order, followed by followed bindings associated with the part tags if
  relevant, followed by the binding associated with the item id, followed
  by the binding associated with the item part if relevant.
  If there are more than one binding for a single tag, only the most
  specific is triggered.
  
  If bindings have been registered for the widget window using the
  \ident{bind} command, they are invoked in addition to bindings registered
  for the items using this widget command. The bindings for items will be
  invoked before the bindings for the window.
\end{blockindent}

\zinccmd{cget}{option}
\begin{blockindent}
  Returns the current value of the widget option given by {\tt option}.
  {\tt option} may be any of the options described in the
  chapter \conceptref{Widget options}{options}.
\end{blockindent}

\zinccmd{chggroup}{tagOrId group ?adjustTransform?}
\begin{blockindent}
  Move the item described by {\tt tagOrId} in the group described
  by {\tt group}. If {\tt tagOrId} or {\tt group} describe more
  than one item, the first in display list order will be used.
  If {\tt adjustTransform} is specified, it will be interpreted
  as a boolean. A true value will lead to an adjustment of the
  item transform in order to maintain an identical display
  rendering of the item regardless of its new position in the
  display hierarchy. If {\tt adjustTransform} is omitted, it
  defaults to false.
\end{blockindent}

\zinccmd{clone}{tagOrId ?attr value ...?}
\begin{blockindent}
  Create an exact copy of all the items described by {\tt tagOrId}.
  The copy goes recursively for group items (deep copy). After copying
  the pairs {\tt attr value} are used, if any, to reconfigure
  the items. Any attribute that as no meaning in the context of some item
  is ignored. The items down the hierarchy of group items are not
  concerned by the configuration phase. The command returns the list
  of cloned items id in creation order (display list order of the models).
  No item id will be returned for items cloned in the hierarchy of
  cloned groups.

\end{blockindent}

\zinccmd{configure}{?option? ?value? ?option value ...?}
\begin{blockindent}
  Query or modify the options of the widget. If no {\tt option}
  is given, returns a list describing all the supported options (see the
  chapter \conceptref{Widget options}{options}). If an {\tt option} is
  specified without any {\tt value}, the command returns a list
  describing the named option. If some
  {\tt option - value} pairs are given, then the corresponding options
  are changed and the command return an empty string.
\end{blockindent}

\zinccmd{contour}{tagOrId operator coordListOrTagOrId}
\begin{blockindent}
  Manipulate contours on items that can handle multiples geometric
  contours. Currently only curve items can do this.

  {\tt tagOrId} specifies the item whose contours will be modified.
  If {\tt tagOrId} describes more than one item, the first in
  display list order will be used.
  
  {\tt coordListOrTagOrId} specifies a list of coordinates or an
  item describing a contour. If a list is specified it should
  contain a pair number of floating point values specifying the
  contour vertices X and Y in order. If a tag or an id is specified,
  it is should be from one of these classes: arc, bezier curve,
  icon, rectangle, tabular, text, window. The external shape of
  the item will be used as the contour. If {\tt coordListOrTagOrId}
  describes more than one item, the first in display list order
  will be used.

  {\tt operator} specifies the operation that will be carried. This
  can be:
  
  \begin{description}
  \item{diff} Substract the given contour from the item contours
  \item{inter} Intersect the given contour and the item contours,
    replacing the original contours by the intersection.
  \item{union} Compute the union of the given contour and the
    item's contours, replacing the original contours by the union.
  \item{xor} Compute the exclusive or of the given contour and the
    item's contours, replacing the original contours by the result.
  \end{description}

  An error in generated if the items are not of a correct type or if
  the coordinate list is malformed.
  
  \emph{NOTE: This command is available only when GPC support has been
    built in Zinc.}
\end{blockindent}

\zinccmd{coords}{tagOrId ?add/remove? ?contour? ?index? ?coordList?}
\begin{blockindent}
  Query or changes the coordinates of the item described by {\tt tagOrId}.
  If {\tt tagOrId} describes more than one item, the first in display
  list order is used. The optional {\tt contour} gives the contour, if
  available, that should be operated. The default contour is 0. The
  optional {\tt index} gives the vertex index that should be operated
  in the given contour. The optional {\tt coordList} is a list of one or
  more vertices described as X, Y floating point values that will be used
  to replace or add coordinates to the current contour.

  Almost all items can be manipulated by this command, the map item is
  the only current exception. The effect of the command can be quite
  different depending on the item. For icons, texts, windows, tabulars,
  the coordinates of the anchor can be modified or read. For groups, the
  coordinates of the origin of the transformation can be set or read. For
  tracks and waypoints, the coordinates of the current position can be set
  or read. For tracks setting the current position this way will make the
  previous position shift into the history. For reticles, the coordinates
  of the center can be set or read. For arcs and rectangles, the coordinates
  of the origin and corner can be set or read. For beziers, the coordinates
  of the vertices can be set or read and it is possible to remove or add
  vertices to an existing item. For curves, the capabilities of bezier are
  extended to support multiple contours. For all items that do not support
  multiple contours (currently all except curves) the {\tt contour} parameter
  should be omitted or specified as zero.
  
  The optional parameters must be combined to produce a given behavior.
  Here are the various form recognized by the command:

  \begin{description}
  \item{\code{.r coords tagOrId contour}}\\
    Get all coordinates of contour. All items can answer if contour
    is zero. Curves can handle other contours.
    
  \item{\code{.r coords tagOrId contour coordList}}\\
    Set all coordinates of contour. All items can do it if contour
    is zero.  Curves can handle other contours.
    For groups, icons, texts, windows, tabulars, reticles, tracks,
    waypoints, only the first vertex will be used. For rectangles and
    arcs, only the first two vertices will be used. Beziers and curves can
    handle any number of vertices.
    
  \item{\code{.r coords tagOrId contour index}}\\
    Get coordinate at index in contour. All items can answer if contour
    is zero. Curves can handle other contours.  For groups, icons, texts,
    windows, tabulars, reticles, tracks, waypoints, index mst be zero.
    For rectangles and arcs, index must zero or one.
    
  \item{\code{.r coords tagOrId contour index coordList}}\\
    Set coordinate at index in contour. All items can do it if contour
    is zero.  Curves can handle other contours. For groups, icons, texts,
    windows, tabulars, reticles, tracks, waypoints, index must be zero.
    For rectangles and arcs, index must zero or one.
    
  \item{\code{.r coords tagOrId remove contour index}}\\
    Remove coordinate at index in contour. Can only be handled by beziers
    and curves. Only curves can handle contours other than zero.
    
  \item{\code{.r coords tagOrId add contour coordList}}\\
    Add coordinates at the end of contour. Can only be handled by beziers
    and curves. Only curves can handle contours other than zero.
    
  \item{\code{.r coords tagOrId add contour index coordList}}\\
    Add coordinates at index in contour. Can only be handled by beziers
    and curves. Only curves can handle contours other than zero.
  \end{description}
  
  And the slightly abbreviated forms:
  
  \begin{description}
  \item{\code{.r coords tagOrId}}\\
    Get all coordinates of contour 0. See first form.
    
  \item{\code{.r coords tagOrId coordList}}\\
    Set all coordinates of contour 0. See second form.
    
  \item{\code{.r coords tagOrId remove index}}\\
    Remove coordinate at index in contour 0. See fifth form.
    
  \item{\code{.r coords tagOrId add coordList}}\\
    Add coordinates at the end of contour 0. See sixth form.
  \end{description}
\end{blockindent}

\zinccmd{currentpart}{}
\begin{blockindent}
  Returns a string specifying the item part over which the pointer is.
  If the current item doesn't have parts or if the pointer is not over
  an item (no item has the \ident{current} tag) the command return {\tt ""}.
  The string can be either an integer describing a field index or the
  name of a special part of the item. Consult each item description to
  find out which part names can be reported.
\end{blockindent}

\zinccmd{cursor}{tagOrId index}
\begin{blockindent}
  Set the position of the insertion cursor for the items described by
  {\tt tagOrId} to be just before the character at {\tt index}. If
  some of the items described by {\tt tagOrId} don't support an
  insertion cursor, the command doesn't change them. The possible
  values for {\tt index} are described in the \cmdref{index} command.
  The command returns an empty string.
\end{blockindent}

\zinccmd{dchars}{tagOrId first ?last?}
\begin{blockindent}
  Delete the character range defined by the parameters {\tt first} and
  {\tt last} inclusive in all the items described by {\tt tagOrId}.
  Items that doesn't support text indexing are skipped by the command.
  If {\tt last} is not specified, the command deletes the character
  located at {\tt first}. The command returns an empty string.
\end{blockindent}

\zinccmd{dtag}{tagOrId ?tagToDelete?}
\begin{blockindent}
  Delete the tag {\tt tagToDelete} from the list of tags associated
  with each item named by {\tt tagOrId}. If an item doesn't have
  the tag then it is leaved unaffected. If {\tt tagToDelete} is
  omitted, {\tt tagOrId} is used instead. The command returns an
  empty string as result.
\end{blockindent}

\zinccmd{find}{searchCommand ?arg arg ...?}
\begin{blockindent}
  This command returns the list of all items selected by {\tt searchCommand}
  and the {\tt args}. See the \cmdref{addtag} command for an explanation of
  {\tt searchCommand} and the various {\tt args}. The items are sorted in
  drawing order, topmost first.
\end{blockindent}

\zinccmd{fit}{coordList error}
\begin{blockindent}
  This command fits a sequence of Bezier segments on the curve described
  by the vertices in {\tt coordList} and returns a list of vertices describing
  the control points for the generated segments. All the points on the fitted
  segments will be within {\tt error} distance from the given curve.
  {\tt coordList} should contain a pair number of coordinates in x, y order.
  The returned control point list consists of four control points per Bezier
  segment with two consecutive segments sharing their last/first control point.
  The control points are in x, y order and can be used to create or change a
  Bezier item.
\end{blockindent}

\zinccmd{focus}{focus ?tagOrId?}
\begin{blockindent}
  Set the keyboard focus to the item describe by {\tt tagOrId}. If {\tt tagOrId}
  describe more than one item, the first item in display list order that supports
  an insertion cursor is used. If no such item exists, the command has no effect.
  If {\tt tagOrId} is an empty string the focus is reset and no item has the focus.
  If {\tt tagOrId} is not specified, the command returns the id of the item
  with the focus or an empty string if no item has the focus.

  When the focus has been set to an item, the item will display an insertion cursor
  and the keyboard events will be directed to that item. The widget receive keyboards
  events only if it has the window focus. It may be necessary to use the Tk focus
  command to force the focus to the widget window.
\end{blockindent}

\zinccmd{gettags}{tagOrId}
\begin{blockindent}
  This command returns the list of all the tags associated with
  the item specified by {\tt tagOrId}. If more than one item is
  named by {\tt tagOrId}, then the topmost in display list order
  is used to return the result. If no item is named by {\tt tagOrId},
  then the empty list is returned.
\end{blockindent}

\zinccmd{group}{tagOrId}
\begin{blockindent}
  Returns the group containing the item described by {\tt tagOrId}.
  If more than one item is named by {\tt tagOrId}, then the topmost
  in display list order is used to return the result.
\end{blockindent}

\zinccmd{hasanchors}{tagOrId}
\begin{blockindent}
  This command returns a boolean telling if the item specified by
  {\tt tagOrId} supports anchors. If more than one item is named by
  {\tt tagOrId}, then the topmost in display list order is used to
  return the result. If no items are named by {\tt tagOrId}, an error
  is raised.
\end{blockindent}

\zinccmd{hasfields}{tagOrId}
\begin{blockindent}
  This command returns a boolean telling if the item specified by
  {\tt tagOrId} supports fields. If more than one item is named by
  {\tt tagOrId}, then the topmost in display list order is used to
  return the result. If no items are named by {\tt tagOrId}, an error
  is raised.
\end{blockindent}

\zinccmd{hastag}{tagOrId tag}
\begin{blockindent}
  This command returns a boolean telling if the item specified by
  {\tt tagOrId} has the specified tag. If more than one item is
  named by {\tt tagOrId}, then the topmost in display list order
  is used to return the result. If no items are named by {\tt tagOrId},
  an error is raised.
\end{blockindent}

\zinccmd{index}{tagOrId index}
\begin{blockindent}
  This command returns a number which is the numerical index in the item
  described by {\tt tagOrId} corresponding to {\tt index}. {\tt index}
  should be a textual description of a text index that can have the
  following forms:
  \begin{description}
  \item{number} This should be an integer giving the character position
    within the text of the item. The indices are zero based. A number
    less than zero is treated as zero and a number greater than the
    text length is rounded to the text length. A number equal to the
    text length refers to the position past the last character in the
    text.
  \item{end} Refers to the position past the last character in the
    text. This is the same as specifying a number equal to the text
    length.
  \item{insert} Refers to the character just before the insertion
    cursor in the item.
  \item{sel.first} Refers to the first character of the selection in
    the item. If the selection is not in the item, this form returns
    an error.
  \item{sel.last}Refers to the last character of the selection in
    the item. If the selection is not in the item, this form returns
    an error.
  \item{@x,y} Refers to the character at the point given by x and y,
    x and y are interpreted as device coordinates. If the point lies
    outside of the area corvered by the item, they refer to the first
    or last character in the line that is closest to the point.
  \end{description}
  
  The command return a value between 0 and the number of character in
  the item. If {\tt tagOrId} describe more than one item the index is
  processed in the first item supporting text indexing in display list
  order.
\end{blockindent}

\zinccmd{insert}{insert tagOrId before string}
\begin{blockindent}
  This command inserts {\tt string} in each item described by {\tt tagOrId}
  just before the text position described by {\tt before}. The possible
  values for {\tt before} are described in the \cmdref{index} command.
  Items that doesn't support text indexing are skipped by the command.
  The command returns an empty string.
\end{blockindent}

\zinccmd{itemcget}{tagOrId ?field? attr}
\begin{blockindent}
  Returns the current value of the attribute given by {\tt attr} for
  the item named by {\tt tagOrId}. If {\tt tagOrId} name more than
  one item, the topmost in display list order is used. If {\tt field} is
  given, it must be a valid field index for the item or an error will be
  reported. If a field index is given, the command will interpret {\tt attr}
  as a field attribute (see \objectref{field}), otherwise it will be interpreted
  as an item attribute (see the chapter \conceptref{Item types}{items}).
  If the attribute is not available for the field or item type, an error is
  reported.
\end{blockindent}

\zinccmd{itemconfigure}{tagOrId ?field? ?attr? ?value? ?attr value ...?}
\begin{blockindent}
  Query or modify the attributes of an item or field. If no attribute
  is given, returns a list of lists describing all the supported attributes.
  If a single attribute is specified without a value, the command returns
  a list describing the named attribute. Each attribute is described by a
  list with the following content: the attribute name, the attribute type,
  a boolean telling if the attribute is read-only, an empty string, and
  the current value of the attribute. In the two querying forms of the
  command the topmost item described by {\tt tagOrId} is used.

  If at least one attribute - value pair is given, then the corresponding
  attributes are changed for all the items described by {\tt tagOrId} and
  the command return an empty string.
  If {\tt field} is given, it must be a valid field index for the item or
  an error will be reported. If a field index is given, the command will
  interpret the given attributes as field attributes, otherwise they will
  be interpreted as item attributes.
\end{blockindent}

\zinccmd{lower}{tagOrId ?belowThis?}
\begin{blockindent}
  Reorder all the items given by {\tt tagOrId} so that they will be
  under the item given by {\tt belowThis}. If {\tt tagOrId} name more
  than one item, their relative order will be preserved. If
  {\tt tagOrId} doesn't name an item, an error is raised. If
  {\tt belowThis} name more than one item, the bottom most them is used.
  If {\tt belowThis} doesn't name an item, an error is raised. If
  {\tt belowThis} is omitted the items are put at the bottom most
  position of their respective groups. The command ignore all items named
  by {\tt tagOrId} that are not in the same group than {\tt belowThis} or,
  if not specified, in the same group than the first item named by
  {\tt tagOrId}. The command returns an empty string.
  As a side affect of this command, the \ident{priority} attribute of
  all the reordered items is ajusted to match the priority of the
  {\tt belowThis} item (or the priority of the bottom most item).
\end{blockindent}

\zinccmd{monitor}{?onOff?}
\begin{blockindent}
  This command controls the gathering of performance data. The data
  gathering is inited and turned on when the command is called with
  a boolean true parameter. The gathering is stopped if the command
  is called with a boolean false parameter. If the command is called
  with no parameters or with a boolean false parameter, it returns a
  string describing the currently collected data. The other form of
  the command returns the empty string.
\end{blockindent}

\zinccmd{numparts}{tagOrId}
\begin{blockindent}
  This command tells how many private parts are available for event bindings
  in the item specified by {\tt tagOrId}. If more than one item is named
  by {\tt tagOrId}, the topmost in display list order is used to return the
  result. If no items are named by {\tt tagOrId}, an error is raised.
\end{blockindent}

\zinccmd{postscript}{}
\begin{blockindent}
  Not yet implemented.
\end{blockindent}

\zinccmd{raise}{tagOrId ?aboveThis?}
\begin{blockindent}
  Reorder all the items given by {\tt tagOrId} so that they will be
  above the item given by {\tt aboveThis}. If {\tt tagOrId} name more
  than one item, their relative order will be preserved. If
  {\tt tagOrId} doesn't name an item, an error is raised. If
  {\tt aboveThis} name more than one item, the topmost in display
  list order is used. If {\tt aboveThis} doesn't name an item, an error
  is raised. If {\tt aboveThis} is omitted the items are put at the top most
  position of their respective groups. The command ignore all items named
  by {\tt tagOrId} that are not in the same group than {\tt aboveThis} or,
  if not specified, in the same group than the first item named by
  {\tt tagOrId}. The command returns an empty string.
  As a side affect of this command, the \ident{priority} attribute of
  all the reordered items is ajusted to match the priority of the
  {\tt aboveThis} item (or the priority of the top most item).
\end{blockindent}

\zinccmd{remove}{tagOrId ?tagOrId ...?}
\begin{blockindent}
  Delete all the items named by each {\tt tagOrId}. The
  command returns an empty string.
\end{blockindent}

\zinccmd{rotate}{tagOrId angle ?centerX centerY?}
\begin{blockindent}
  Add a rotation to the items or the transform described by
  {\tt tagOrId}. If {\tt tagOrId} describe a named transform
  then this transform is used to do the operation. If {\tt tagOrId}
  describe more than one item then all the items are affected by
  the opration. If {\tt tagOrId} describe neither a named transform
  nor an item, an error is raised. The angle is given in radians.
  The optional parameters describe the center of rotation, which
  defaults to the origin.
\end{blockindent}

\zinccmd{scale}{tagOrId xFactor yFactor}
\begin{blockindent}
  Add a scale factor to the items or the transform described by
  {\tt tagOrId}. If {\tt tagOrId} describe a named transform
  then this transform is used to do the operation. If {\tt tagOrId}
  describe more than one item then all the items are affected by
  the opration. If {\tt tagOrId} describe neither a named transform
  nor an item, an error is raised. A separate factor is specified for
  X and Y.
\end{blockindent}

\zinccmd{select}{option ?tagOrId? ?arg?}
\begin{blockindent}
  Manipulates the selection as requested by {\tt option}. {\tt tagOrId}
  Describe the target item. This item must support text indexing and
  selection. If more than one item is referred to by {\tt tagOrId}, the
  first in display list order that support both text indexing and selection
  will be used. Some forms of the command include an {\tt index} parameter,
  this parameter describe a textual position within the item and should
  be a valid index as described in the \cmdref{index} command.
  The valid forms of the command are :

  \begin{description}
  \item{\code{.r select adjust tagOrId index}} \\
    Adjust the end of the selection in {\tt tagOrId} that is nearest to
    the character given by {\tt index} so that it is at {\tt index}. The
    other end of the selection is made the anchor for future select to
    commands. If the selection is not currently in {\tt tagOrId}, this
    command behaves as the select to command. The command returns an empty
    string.
  \item{\code{.r select clear}} \\
    Clear the selection if it is in the widget. If the selection is not
    in the widget, the command has no effect. Return an empty string.
  \item{\code{.r select from tagOrId index}} \\
    Set the selection anchor point for the widget to be just before
    the character given by {\tt index} in the item described by
    {\tt tagOrId}. The command has no effect on the selection, it
    sets one end of the selection so that future select to can actually
    set the selection. The command returns an empty string.
  \item{\code{.r select item}} \\
    Returns the id of the selected item, if the selection is in an item
    on this widget. Otherwise the command returns an empty string.
  \item{\code{.r select to tagOrId index}} \\
    Set the selection to be the characters that lies between the selection
    anchor and {\tt index} in the item described by {\tt tagOrId}. The
    selection includes the character given by {\tt index} and includes the
    character given by the anchor point if {\tt index} is greater or
    equal to the anchor point. The anchor point is set by the most recent
    select adjust or select from command issued for this widget. If the
    selection anchor point for the widget is not currently in {\tt tagOrId},
    it is set to the character given by index. The command returns an empty
    string.
  \end{description}

\end{blockindent}

\zinccmd{smooth}{coordList}
\begin{blockindent}
  This command computes a sequence of Bezier segments in order to smooth the
  curve described by the vertices in {\tt coordList} and returns a list of
  vertices describing the control points for the generated segments.
  {\tt coordList} should contain a pair number of coordinates in x, y order.
  The returned control point list consists of four control points per Bezier
  segment with two consecutive segments sharing their last/first control point.
  The control points are in x, y order and can be used to create or change a
  Bezier item.
\end{blockindent}

\zinccmd{tapply}{}
\begin{blockindent}
  Not yet implemented.
\end{blockindent}

\zinccmd{tdelete}{tName}
\begin{blockindent}
  Destroy a named transform. If the given name is not found
  among the named transforms, an error is raised.
\end{blockindent}

\zinccmd{transform}{?tagOrIdFrom? tagOrIdTo coordList}
\begin{blockindent}
  This command returns a list of coordinates obtained by transforming
  the coordinates given in {\tt coordList} from the coordinate space
  of the transform or item described by {\tt tagOrIdFrom} to the
  coordinate space of the transform or item described by {\tt tagOrIdTo}.
  If {\tt tagOrIdFrom} is omitted it defaults to the device coordinate
  space. If either {\tt tagOrId} describe more than one item, the topmost
  in display list order is used. If {\tt tagOrId} doesn't describe
  either a transform or an item, an error is raised.
\end{blockindent}

\zinccmd{translate}{tagOrId xAmount yAmount}
\begin{blockindent}
  Add a translation to the items or the transform described by
  {\tt tagOrId}. If {\tt tagOrId} describe a named transform
  then this transform is used to do the operation. If {\tt tagOrId}
  describe more than one item then all the items are affected by
  the opration. If {\tt tagOrId} describe neither a named transform
  nor an item, an error is raised. A separate value is specified for
  X and Y.
\end{blockindent}

\zinccmd{treset}{tagOrId}
\begin{blockindent}
  Set the named transform or the transform for the items described
  by {\tt tagOrId} to identity. If {\tt tagOrId} describe neither
  a named transform nor an item, an error is raised.
\end{blockindent}

\zinccmd{trestore}{tagOrId tName}
\begin{blockindent}
  Set the transform for the items described by {\tt tagOrId} to the
  transform named by {\tt tName}. If {\tt tagOrId} doesn't describe
  any item or if the transform named {\tt tName} doesn't exist, an
  error is raised.
\end{blockindent}

\zinccmd{tsave}{tagOrId tName}
\begin{blockindent}
  Create (or reset) a transform associated with the name {\tt tName}
  which has for initial value the transform associated with the item
  {\tt tagOrId}. If {\tt tagOrId} describe more than one item, the
  topmost in display list order is used. If {\tt tagOrId} doesn't describe
  any item, an error is raised. If {\tt tName} already exists, the
  transform is set to the new value. This command is the only way to
  create a named transform.
\end{blockindent}

\zinccmd{type}{tagOrId}
\begin{blockindent}
  This command returns the type of the item specified by {\tt tagOrId}.
  If more than one item is named by {\tt tagOrId}, then the type of
  the topmost item in display list order is returned.
  If no items are named by {\tt tagOrId}, an error is raised.
\end{blockindent}

\zinccmd{vertexat}{tagOrId x y}
\begin{blockindent}
  Return a list of values describing the vertex and edge closest to the
  device coordinates {\tt x} and {\tt y} in the item described by {\tt tagOrId}.
  If {\tt tagOrId} describes more than one item, the first item in display list
  order that supports vertex picking is used. The list consists of the index
  of the contour containing the returned vertices, the index of the
  closest vertex and the index of a vertex next to the closest vertex that
  identify the closest edge (located between the two returned vertices).
\end{blockindent}


\chapter{Attribute types}

\attrtype{alignment}
\begin{blockindent}
  Specifies the horizontal alignment of an entity.
  The legal values are: {\tt left}, {\tt right}, {\tt center}.
\end{blockindent}

\attrtype{anchor}
\begin{blockindent}
  Specifies one of the nine caracteristic points of a rectangle
  or bounding box that will be used to position the object.
  These points include the four corners the four edge centers
  and the center of the rectangle. The possible values are: {\tt nw},
  {\tt n}, {\tt ne}, {\tt e}, {\tt se}, {\tt s}, {\tt sw}, {\tt w},
  {\tt center}.
\end{blockindent}

\attrtype{angle}
\begin{blockindent}
  Specifies an angle in degrees, the value must be an integer from
  0 to 360 inclusive.
\end{blockindent}

\attrtype{autoalignment}
\begin{blockindent}
  Specifies the horizontal alignments that should be used for track
  or way point fields depending on the label position relative to
  the position of the item. The attribute may have two forms: a
  single dash {\tt -} means turning of the automatic alignment feature
  for the field; The other form consists in three letters which
  describe in order: the alignment to be used when the label is to
  the left of the item position, above or below the item position and
  to the right of the item position. The possible values for each
  letter is: {\tt l} for left alignment, {\tt c} for center
  alignment and {\tt r} for right alignment. Here is an example:
  {\tt rll} means right align the field if the label is on the
  left side of the item, and left align if the label is above, below
  or on the right of the item.
\end{blockindent}

\attrtype{bitmap}
\begin{blockindent}
  This should be a string naming a valid Tk bitmap. The bitmap should
  be known to Tk prior to its use. Zinc registers a set of bitmaps that
  can be used for any bitmap valued attribute (see \ref{builtinbitmaps}).
  Extensions to Tk are available to create or manipulate bitmaps from a
  script. The value may also name a file containing a valid X11 bitmap
  description. The syntax in this cas is {\tt @filename}.
\end{blockindent}

\attrtype{bitmaplist}
\begin{blockindent}
  This is an extension of the \ident{bitmap} attribute type. It describes
  a list of bitmaps that will be the value of the attribute.
\end{blockindent}

\attrtype{boolean}
\begin{blockindent}
  This is the description of a standard Tcl boolean value. The possible
  values are {\tt 0}, {\tt false}, {\tt no} or {\tt off} for the false
  value and {\tt 1}, {\tt true}, {\tt yes} or {\tt on} for the true value.
\end{blockindent}

\attrtype{capstyle}
\begin{blockindent}
  This the description of a line cap. The possible values are {\tt butt},
  {\tt projecting} and {\tt round}.
\end{blockindent}

\attrtype{color}
\begin{blockindent}
  This is a string that describes a color. The description may have one of
  two forms, a colorname such as {\tt green} or {\tt LemonChiffon} or an
  rgb specification in one of the following formats, {\tt \#rgb}, {\tt \#rrggbb},
  {\tt \#rrrgggbbb} or {\tt \#rrrrggggbbbb}. If less than four digits are provided
  for a color component, they represent the most significant bits of the
  component. For example {\tt \#3a7} is equivalent to {\tt \#3000a0007000}.
\end{blockindent}

\attrtype{dimension}
\begin{blockindent}
  This is a string that represent a screen distance which will be converted
  into a distance in pixels. The string consists in a floating point signed
  number optionally followed by a character specifying the unit. The character
  can be {\tt c} for centimeters, {\tt i} for inches, {\tt m} for millimeters,
  {\tt p} for printer's points (1/72 inch) or nothing for pixels.
\end{blockindent}

\attrtype{edgelist}
\begin{blockindent}
  This is a list describing the edges of a border that should be considered
  for processing (e.g for drawing). The possible values are {\tt left},
  {\tt right}, {\tt top}, {\tt bottom}, {\tt contour}, {\tt oblique} and
  {\tt counteroblique}. The {\tt contour} value is the same as the
  {\tt "left top right bottom"} list. The {\tt oblique} and {\tt counteroblique}
  values describe diagonal segments from top-left to bottom-right and from
  top-right to bottom-left respectively.
\end{blockindent}

\attrtype{font}
\begin{blockindent}
  This is a string describing a font. For an exhaustive description of
  what is legal as a font description, refer to the Tk \ident{font}
  command man page. Just to mention to popular methods, it is possible to
  specify a font by it's X11 font name or by a list whose elements are the
  font family, the font size and then zero or more styles including {\tt normal},
  {\tt bold}, {\tt roman}, {\tt italic}, {\tt underline}, {\tt overstrike}.
\end{blockindent}

\attrtype{gradientcolor}
\begin{blockindent}
  This is a string describing a color span to be used for example to fill
  a surface. The string consists of the first color of the span, the last
  color of the span and the number of steps that it should take to go from
  the first color to the last. The three elements are sperated by spaces.
  The two colors can take any form legal in a color context (see the
  \ident{color} attribute type). The number of steps should be a non negative
  integer. The intermediate colors are generated by linear interpolation
  between the two specified colors. A simplified form consists in only one
  color, this is useful when no gradient filling is needed. When the full
  description is used and only one color is used by the item (e.g when
  filling with a solid color) then the span median color is used.
\end{blockindent}

\attrtype{gradientgeometry}
\begin{blockindent}
  This is a string describing the geometry that should be used to fill a
  surface with a color gradient. The string should have one of the forms
  {\tt threshold1-threshold2/angle}, {\tt threshold/angle},
  {\tt threshold1-threshold2} or {\tt threshold}. The threshold values
  are a percentage along the gradient axis where the mid color should
  be reached (first threshold) or leaved (second threshold). The angle
  is an unsigned value in degrees specifying the gradient axis orientation.
\end{blockindent}

\attrtype{image}
\begin{blockindent}
  This should be the name of a previously registered Tk image. In pure
  Tk only GIF, PPM and bitmap formats are available as source for images.
  With the Img extension many others popular formats are added including
  JPEG, XPM and PNG.
\end{blockindent}

\attrtype{integer}
\begin{blockindent}
  Describes a signed integer value.
\end{blockindent}

\attrtype{item}
\begin{blockindent}
  Describes an item id or a tag. If a tag is provided an item will be
  searched for the tag and the first matching in display list order will
  be used.
\end{blockindent}

\attrtype{joinstyle}
\begin{blockindent}
  Describes a join style. The possible values are {\tt bevel}, {\tt miter}
  and {\tt round}.
\end{blockindent}

\attrtype{labelformat}
\begin{blockindent}
  The new format is as follow. Parameters between [] are
  optional and take default values when omitted. The spaces can appear
  between blocks but not inside.
  
  \verb+[WidthxHeight] [field0Spec] [field1Spec] [fieldnSpec]+\\
  
  Width and Height set the size of the clipping box surrounding
  the label. If it is not specified, there will be no clipping.
  It it is specified alone it is the size of the only displayed
  field (0).
  
  fieldSpec is:
  \verb+sChar fieldWidth sChar fieldHeight [pChar fieldX pChar fieldY]+.
  
  Each field description refers to the field of same index in the field
  array.
  If \verb+sChar+ is \verb+'x'+, the dimension is in pixel. If \verb+sChar+ is
  \verb+'f'+, the dimension is in percentage of the mean width/height of a
  character (in the field font). If \verb+sChar+ is \verb+'i'+, the dimension
  is in percentage of the size of the image in the field. If \verb+sChar+ is
  \verb+'a'+, the dimension is automatically adjusted to match the field's
  content plus the given value in pixels. If \verb+sChar+ is \verb+'l'+,
  the dimension is automatically adjusted to match the global size of the
  label (not counting fields with \verb+'l'+ size specs). The positional
  parameter is not used with this size specification (always 0) and it is not
  possible to reference the field in another field spec.
  
  If \verb+pChar+ is \verb-'+'- the position is in pixel (possibly negative).
  If it is \verb+'<'+ the position is the index of the field at the left/top
  of which the current field should be  attached. If it is \verb+'>'+ the
  position is the index of the field at the right/bottom of which the current
  field should be attached. If \verb+pChar+ is \verb+'^'+ the position is
  the index of the field used to align the left/top border (left on left or
  top on top). If \verb+pChar+ is \verb+'$'+ the %$ position is the index
  of the field used to align the right/bottom border (right on right or
  bottom on bottom).
  
  The positional parameters can be omitted if there is only one field.  
\end{blockindent}

\attrtype{leaderanchors}
\begin{blockindent}
  Describe where to attach the label leader on the label. These are not
  to be confused with the regular rectangular anchors.
  
  The format is: \verb+lChar leftLeaderAnchor [lChar rightLeaderAnchor]+
  
  If \verb+lChar+ is a \verb+'|'+, \verb+leftLeaderAnchor+ and \verb+rightLeaderAnchor+
  are the indices of the fields that serve to anchor the label's leader. More
  specifically the bottom left corner of the left field and the bottom right corner of
  the right field are used as the anchors.
  If \verb+lChar+ is \verb+'%'+, \verb+leftLeaderAnchor+ and \verb+rightLeaderAnchor+
  should be specified as \verb+valxval+, \verb+val+ being a percentage (max 100) of
  the width/height of the label bounding box. If rightLeaderAnchor is not specified
  it defaults to field 0. If rightLeaderField is not specified it defaults to
  leftLeaderAnchor. If neither of them are specified, the center of the label
  is used as an anchor.
\end{blockindent}

\attrtype{lineend}
\begin{blockindent}
  Describe the shape of the arrow at the beginning or end of a path.
  This is a list of three numbers describing the arrow shape in the
  following order:
  distance along the axis from neck to tip of the arrowhead,
  distance from trailing points to tip and distance from outside
  edge of the line to the trailing points (see canvas).
  If an empty list is given, there is no arrow.
\end{blockindent}

\attrtype{lineshape}
\begin{blockindent}
  Describes the shape of a path connecting two points. The possible
  values are {\tt straight}, {\tt rightlightning}, {\tt leftlightning},
  {\tt rightcorner}, {\tt leftcorner}, {\tt doublerightcorner} and
  {\tt doubleleftcorner}.
\end{blockindent}

\attrtype{linestyle}
\begin{blockindent}
  Describes the style of the dashes that should be used to draw a line.
  The possible values are {\tt simple}, {\tt dashed}, {\tt mixed} and
  {\tt dotted}.
\end{blockindent}

\attrtype{mapinfo}
\begin{blockindent}
  This is the name of a previously registered mapinfo object
  (see \ref{mapinfocmd}) that will define the lines, symbols,
  texts an other graphical parts displayed in a map item.
\end{blockindent}

\attrtype{number}
\begin{blockindent}
  This is floating point value. It can be optionally expressed in
  exponent notation.
\end{blockindent}

\attrtype{position}
\begin{blockindent}
  This is a list of two floating point values that describes a point
  position or some two dimensional delta (used for example to describe
  the speed vector of a track item).
\end{blockindent}

\attrtype{relief}
\begin{blockindent}
  Describes a border relief. The possible values are {\tt flat}, {\tt groove},
  {\tt raised}, {\tt ridge} and {\tt sunken}.
\end{blockindent}

\attrtype{string}
\begin{blockindent}
  Just what its name implies, a string.
\end{blockindent}

\attrtype{taglist}
\begin{blockindent}
  This should be a list of strings describing the tags that are set
  for an item.
\end{blockindent}

\attrtype{window}
\begin{blockindent}
  A string describing an X window id. This id can be returned by the
  {\tt winfo id a-widget-path} command.
\end{blockindent}



\chapter{Labels, fields and label formats}
\concept{label}
\concept{labelformat}
\object{field}
Applicable attributes for fields:


\attribute{alignment}{alignment}{
  The horizontal alignment of both the text and the image. The default value
  is {\tt left}.}
\attribute{autoalignment}{autoalignment}{
  The dynamic horizontal alignments used depending on the label orientation.
  The default value is {\tt "-"} which means do not use dynamic alignment.}
\attribute{backcolor}{color}{
  The field background color. The default value is the current value of the widget
  option \ident{-foreground}.}
\attribute{border}{edgelist}{
  The border description edge by edge. The border is a one pixel wide outline that
  is drawn around the field outside the relief. Some border edges can be omitted,
  this attribute describe the edges that should be displayed as part of the border.
  The default value is {\tt ""}.}
\attribute{bordercolor}{color}{
  The border color. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{color}{color}{
  The text color. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{filled}{boolean}{
  Specifies if the field background should be filled. The default value is
  {\tt false}.}
\attribute{fillpattern}{bitmap}{
  The fill pattern used when filling the background. This attribute is overrided
  by the tile attribute. The default value is {\tt ""}.}
\attribute{font}{font}{
  The text font. The default value is the current value of the widget option
  \ident{-font}.}
\attribute{image}{image}{
  An image to be displayed in the field. The image will be centered vertically
  in the field. The default value is {\tt ""}.}
\attribute{relief}{relief}{
  Specifies the relief to be drawn around the field, inside the border. The
  default value is {\tt flat}.}
\attribute{reliefthickness}{dimension}{
  Width of the relief drawn around the field. The default value is {\tt 0}
  which means that no relief should be drawn around the field.}
\attribute{sensitive}{boolean}{
  Specifies if the field should react to input events. The default value is
  {\tt true}.}
\attribute{text}{string}{
  A line of text to be displayed in the field. The text will be centered vertically
  in the field. The default value is {\tt ""}.}
\attribute{tile}{image}{
  Specifies an image that will be tiled over the field background is the field
  is filled. This attribute has precedence over the \ident{fillpattern} attribute.
  The default value is {\tt ""}.}
\attribute{visible}{boolean}{
  Specifies if the field is displayed. The default value is {\tt true}.}


\chapter{Item types}
\concept{items}

This chapter introduces the item types that can be used in \ident{zinc}. Each
item type provides a set of options that may be used to query or change the
item behavior. Some item types cannot be used with some widget commands, or
use special parameters with some command. Those cases are noted in the description
of the item.


\section{Group items}

\object{group}
Applicable attributes for \ident{group}:

\attribute{atomic}{boolean}{Specifies if the group should report itself
  or its components during a search or for binding related operations. This
  attribute enable the use of a group as a single complex object build from
  smaller parts. It is possible to search for this item or use it in bindings
  without dealing with its smaller parts. The defaut value is {\tt false}.}
\attribute{clip}{item}{The item used to clip the children of the group. The shape
  of this item define an area that is used as a clipping shape when drawing the
  children of the group. Most items can be used here but notable exceptions are
  the \ident{reticle} and \ident{map} items. The default value is {\tt ""} which
  means that no clipping will be performed.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should be
  composed with the local transform. The defaut value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The defaut value is {\tt true}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 0}.}
\attribute{sensitive}{boolean}{Specifies if the item and all its children should
  react to events. The defaut value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item and all its children is
  displayed. The defaut value is {\tt true}.}


\section{Track and WayPoint items}

\object{track}
Applicable attributes for \ident{track}:

\attribute{circlehistory}{boolean}{If set to true the track history will
  be plotted as cricles otherwise it will be plotted as squares. The default
  value is {\tt false}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation
  should be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{connecteditem}{item}{The item at the other end of the connection link.
  The default value is {\tt ""} which means that no connection link will be drawn.}
\attribute{connectioncolor}{color}{The color of the connection link. The
  default value is the current value of the widget option \ident{-foreground}.}
\attribute{connectionsensitive}{boolean}{Specifies if the connection link
  is sensitive. The actual sensitivity is the logical and of this attribute and
  of the item {\tt sensitive}{boolean} attribute. The default value is {\tt true}.}
\attribute{connectionstyle}{linestyle}{The line style of the connection link.
  The default value is {\tt simple}.}
\attribute{connectionwidth}{dimension}{The width of the connection link. The
  default value is {\tt 1}.}
\attribute{filledhistory}{boolean}{If set to true the track history will be
  filled otherwise it will be outlined. The default value is {\tt true}.}
\attribute{filledmarker}{boolean}{If set to true the circular marker will be
  filled otherwise it will be outlined. The default value is {\tt false}.}
\attribute{frozenlabel}{boolean}{Specifies if the label should be frozen at
  its current location to prevent the anti overlapping system from moving it. The
  default value is {\tt false}.}
\attribute{historycolor}{color}{The color of the track history. The default value
  is the current value of the widget option \ident{-foreground}.}
\attribute{labelanchor}{anchor}{The anchor used in positionning the label. The
  default value is {\tt center}.}
\attribute{labelangle}{angle}{The angle in degrees between the label anchor
  and the normal to the speed vector. This attribute works with the {\tt labeldistance}
  attribute to specify a position for the label anchor with respect to the item
  origin. There is another alternative method for label positioning which is
  implemented with the {\tt labeldx} and {\tt labeldy} methods. Simultaneous
  use of the two methods should be done with care as there is no automatic update
  of values from the {\tt labeldx}, {\tt labeldy} set to the {\tt labeldistance},
  {\tt labelangle} set. The default value is {\tt 20}.}
\attribute{labeldistance}{dimension}{The minimum distance in pixels between
  the track position and the label anchor. See the explanation of the {\tt labelangle}
  attribute for some more details. The default value is 50.}
\attribute{labeldx}{dimension}{The X offset between the track position and the
  label anchor. The default value is computed from the values in the {\tt labeldistance}
  and {\tt labelangle} attributes.}
\attribute{labeldy}{dimension}{The Y offset between the track position and the label
  anchor. The default value is computed from the values in the {\tt labeldistance} and
  {\tt labelangle} attributes.}
\attribute{labelformat}{labelformat}{Geometry of the label fields. The default
  value is {\tt ""} which means that no label will be displayed.}
\attribute{lastasfirst}{boolean}{If set to true, the last position in the
  history will be drawn in the same color as the current position instead of
  being drawn in the history color. The default value is {\tt false}.}
\attribute{leaderanchors}{leaderanchors}{The attachments of the leader on the
  label side. The default value is {\tt ""} which means that both leader anchors are
  at the label center.}
\attribute{leadercolor}{color}{The color of the label leader. The default value
  is the current value of the widget option \ident{-foreground}.}
\attribute{leaderfirstend}{lineend}{Describe the arrow shape at the current position
  end of the leader. The default value is {\tt ""}.}
\attribute{leaderlastend}{lineend}{Describe the arrow shape at the label end of
  the leader. The default value is {\tt ""}.}
\attribute{leadersensitive}{boolean}{Specifies if the label leader is sensitive.
  The actual sensitivity is the logical and of this attribute and of the item
  {\tt sensitive} attribute. The default value is {\tt true}.}
\attribute{leadershape}{lineshape}{The shape of the label leader. The default
  value is {\tt straight}.}
\attribute{leaderstyle}{linestyle}{The line style of the label leader. The default
  value is {\tt simple}.}
\attribute{leaderwidth}{dimension}{The width of the label leader. The default
  value is {\tt 1}.}
\attribute{markercolor}{color}{The color of the circular marker. The default
  value is the current value of the widget option \ident{-foreground}.}
\attribute{markerfillpattern}{bitmap}{The pattern to use when filling the
  circular marker. The default value is {\tt ""}.}
\attribute{markersize}{number}{The (scale sensitive) size of the circular marker.
  The default value is {\tt 0} which turn off the display of the marker.}
\attribute{markerstyle}{linestyle}{The line style of the marker outline. The
  default value is {\tt simple}.}
\attribute{mixedhistory}{boolean}{If true the track history will be plotted
  with dots every other positions. The default value is {\tt false}.}
\attribute{numfields}{integer}{Gives the number of fields available for the
  label. This attribute is read only.}
\attribute{position}{position}{The current location of the track. The default
  value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 5}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{speedvector}{position}{The speed vector $\Delta x$ and $\Delta y$
  in unit / minute. The default value is {\tt "0 0"} which results in no speed vector
  displayed.}
\attribute{speedvectorcolor}{color}{The color of the trck's speed vector. The
  default value is the current value of the widget option \ident{-foreground}.}
\attribute{speedvectorsensitive}{boolean}{Specifies if the track's speed vector
  is sensitive. The actual sensitivity is the logical and of this attribute and of
  the item {\tt sensitive} attribute. The default value is {\tt true}. }
\attribute{symbol}{bitmap}{The symbol displayed at the current position. The
  default value is {\tt AtcSymbol15}.}
\attribute{symbolcolor}{color}{The color of the symbol displayed at the current
  position. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{symbolsensitive}{boolean}{Specifies if the current position's symbol
  is sensitive to events. The actual sensitivity is the logical and of this attribute
  and of the item {\tt sensitive} attribute. The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default value
  is {\tt true}.}
\attribute{visiblehistorysize}{integer}{The number of past positions that should
  be displayed. The default value is {\tt 6}.}


\object{waypoint}
Applicable attributes for \ident{waypoint}:

\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}. }
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}. }
\attribute{connecteditem}{item}{The item at the other end of the connection link.
  The default value is {\tt ""} which means that no connection link will be drawn.}
\attribute{connectioncolor}{color}{The color of the connection link. The default
  value is the current value of the widget option \ident{-foreground}.}
\attribute{connectionsensitive}{boolean}{Specifies if the connection link is
  sensitive. The actual sensitivity is the logical and of this attribute and of the
  item {\tt sensitive} attribute. The default value is {\tt true}.}
\attribute{connectionstyle}{linestyle}{The line style of the connection link.
  The default value is {\tt simple}.}
\attribute{connectionwidth}{dimension}{The width of the connection link. The
  default value is {\tt 1}.}
\attribute{filledmarker}{boolean}{If set to true the circular marker will be
  filled otherwise it will be outlined. The default value is {\tt false}.}
\attribute{labelanchor}{anchor}{The anchor used in positionning the label. The
  default value is {\tt center}.}
\attribute{labelangle}{angle}{The angle in degrees between the label anchor and
  the normal to the speed vector. This attribute works with the {\tt labeldistance}
  attribute to specify a position for the label anchor with respect to the item origin.
  There is another alternative method for label positioning which is implemented with
  the {\tt labeldx} and {\tt labeldy} methods. Simultaneous use of the two methods
  should be done with care as there is no automatic update of values from the
  {\tt labeldx}, {\tt labeldy} set to the {\tt labeldistance}, {\tt labelangle} set.
  The default value is {\tt 20}.}
\attribute{labeldistance}{dimension}{The minimum distance in pixels between the
  way point position and the label anchor. See the explanation of the {\tt labelangle}
  attribute for some more details. The default value is 50.}
\attribute{labeldx}{dimension}{The X offset between the way point position and
  the label anchor. The default value is computed from the values in the
  {\tt labeldistance} and {\tt labelangle} attributes.}
\attribute{labeldy}{dimension}{The Y offset between the way point position and
  the label anchor. The default value is computed from the values in the
  {\tt labeldistance} and {\tt labelangle} attributes.}
\attribute{labelformat}{labelformat}{Geometry of the label fields. The default
  value is {\tt ""} which means that no label will be displayed.}
\attribute{leaderanchors}{leaderanchors}{The attachments of the leader on the
  label side. The default value is {\tt ""} which means that both leader anchors are
  at the label center.}
\attribute{leadercolor}{color}{The color of the label leader. The default value
  is the current value of the widget option \ident{-foreground}.}
\attribute{leaderfirstend}{lineend}{Describe the arrow shape at the current position
  end of the leader. The default value is {\tt ""}.}
\attribute{leaderlastend}{lineend}{Describe the arrow shape at the label end of
  the leader. The default value is {\tt ""}.}
\attribute{leadersensitive}{boolean}{Specifies if the label leader is sensitive.
  The actual sensitivity is the logical and of this attribute and of the item
  {\tt sensitive} attribute. The default value is {\tt true}.}
\attribute{leadershape}{lineshape}{The shape of the label leader. The default
  value is {\tt straight}.}
\attribute{leaderstyle}{linestyle}{The line style of the label leader. The
  default value is {\tt simple}.}
\attribute{leaderwidth}{dimension}{The width of the label leader. The default
  value is {\tt 1}.}
\attribute{markercolor}{color}{The color of the circular marker. The default
  value is the current value of the widget option \ident{-foreground}.}
\attribute{markerfillpattern}{bitmap}{The pattern to use when filling the circular
  marker. The default value is {\tt ""}.}
\attribute{markersize}{number}{The (scale sensitive) size of the circular marker.
  The default value is {\tt 0} which turn off the display of the marker.}
\attribute{markerstyle}{linestyle}{The line style of the marker outline. The
  default value is {\tt simple}.}
\attribute{numfields}{integer}{Gives the number of fields available for the label.
  This attribute is read only.}
\attribute{position}{position}{The current location of the way point. The default
  value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 4}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{symbol}{bitmap}{The symbol displayed at the current position. The
  default value is {\tt AtcSymbol15}.}
\attribute{symbolcolor}{color}{The color of the symbol displayed at the current
  position. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{symbolsensitive}{boolean}{Specifies if the current position's symbol
  is sensitive to events. The actual sensitivity is the logical and of this attribute
  and of the item {\tt sensitive} attribute. The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Tabular items}

\object{tabular}
Applicable attributes for \ident{tabular}:

\attribute{anchor}{anchor}{The anchor used in positionning the item. The default
  value is {\tt nw}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{connecteditem}{item}{Specifies the item relative to which this item
  is placed. The default value is {\tt ""}.}
\attribute{connectionanchor}{anchor}{Specifies the anchor on the connected item.
  The default value is {\tt sw}.}
\attribute{labelformat}{labelformat}{Geometry of the label fields. The default
  value is {\tt ""} which means that nothing will be displayed.}
\attribute{numfields}{integer}{Gives the number of fields available for the
  label. This attribute is read only.}
\attribute{position}{position}{The item's position relative to the anchor
  (if no connected item specified). The default value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 3}. }
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Text items}

\object{text}
Applicable attributes for \ident{text}:

\attribute{alignment}{alignment}{Specifies the horizontal alignment of the
  lines in the item. The default value is {\tt left}.}
\attribute{anchor}{anchor}{The anchor used in positionning the item. The default
  value is {\tt nw}.}
\attribute{color}{color}{Specifies the color for drawing the text characters,
  the overstrike and underline lines. The default value is the current value
  of the widget option \ident{-foreground}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{connecteditem}{item}{Specifies the item relative to which this item
  is placed. The default value is {\tt ""}.}
\attribute{connectionanchor}{anchor}{Specifies the anchor on the connected item.
  The default value is {\tt sw}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern used to draw the text
  characters, the overstrike and underline lines. The default value is {\tt ""}.}
\attribute{font}{font}{Specifies the font for the text. The default value is
  the current value of the widget option \ident{-font}.}
\attribute{overstriked}{boolean}{If true, a thin line will be drawn horizontally
  across the text characters. The default value is {\tt false}.}
\attribute{position}{position}{The item's position relative to the anchor
  (if no connected item specified). The default value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{spacing}{dimension}{Specifies a pixel value that will be added to
  the inter-line spacing specified in the font. The value can be positive to
  increase the spacing or negative to reduce it. The default value is {\tt 0}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{text}{string}{Specifies the text characters. Newline characters can
  be embedded to force line ends. The default value is {\tt ""}.}
\attribute{underlined}{boolean}{If true, a thin line will be drawn under the
  text characters. The default value is {\tt false}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}
\attribute{width}{dimension}{Specifies the maximum pixel width of the text, a
  line break will be automatically inserted at the closest character position to
  match this constraint. If the value is zero, the width is not under the item
  control and line breaks must be inserted in the text to have multiple lines.
  The default value is {\tt 0}.}


\section{Icon items}

\object{icon}
Applicable attributes for \ident{icon}:

\attribute{anchor}{anchor}{The anchor used in positionning the item. The default
  value is {\tt nw}.}
\attribute{color}{color}{Specifies the fill color used for drawing the bitmap.
  The default value is the current value of the widget option \ident{-foreground}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation
  should be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{connecteditem}{item}{Specifies the item relative to which this
  item is placed}
\attribute{connectionanchor}{anchor}{Specifies the anchor on the connected item.
  The default value is {\tt sw}.}
\attribute{image}{image}{Specifies a Tk image that will be displayed by the item.
  The image may have a mask (depend on the image format) that clip some parts. This
  option has precedence over the {\tt mask} option if both are specified. The
  default value is {\tt ""}.}
\attribute{mask}{bitmap}{Specifies a Tk bitmap that will be displayed by the
  item. The bitmap is filled with the color specified with the {\tt color} option.
  This option is inactive if an image has been specified with the {\tt image} option.}
\attribute{position}{position}{The item's position relative to the anchor (if
  no connected item specified). The default value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Reticle items}

\object{reticle}
Applicable attributes for \ident{reticle}:

\attribute{brightlinecolor}{color}{This is the color of the highlighted
  circles. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{brightlinestyle}{linestyle}{This is the line style of the highlighted
  circles. The default value is {\tt simple}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{firstradius}{number}{This is the radius of the innermost circle of
  the reticle. The default value is {\tt 80}.}
\attribute{linecolor}{color}{This is the color of the regular (not highlighted)
  circles. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{linestyle}{linestyle}{This is the line style of the regular (not
  highlighted) circles. The default value is {\tt simple}.}
\attribute{numcircles}{integer}{Specifies how many circles should be drawn.
  The default value is {\tt -1} which means draw as many circles as needed to
  encompass the current widget window. This does not take into account any possible
  clipping that can mask part of the reticle. The idea behind this trick is to draw
  an infinite reticle that is optimized for the current scale.}
\attribute{period}{integer}{Specifies the recurrence of the bright circles over
  the regulars. The default value is {\tt 5} which means that a bright circle is
  drawn then 4 regulars, etc.}
\attribute{position}{position}{Location of the center of the reticle. The default
  value is {\tt "0 0"}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt false} as the item cannot handle events.}
\attribute{stepsize}{number}{The (scale sensitive) size of the step between two
  consecutive circles. The default value is {\tt 80}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Map items}

\object{map}


  Applicable attributes for \ident{map}:

\attribute{color}{color}{Specifies the color usedd to draw or fill the map. The
  texts and symbols that are part of the map are also drawn in this color.
  The default value is the current value of the widget option \ident{-foreground}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{filled}{boolean}{If set to true the map wil be filled otherwise it
  will be drawn as thin lines. The default is {\tt false}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern to be used when filling
  the map. The value should be a legal Tk bitmap. The default value is {\tt "}.}
\attribute{font}{font}{Specifies the font that will be used to drawn the texts of
  the map.  The default value is the current value of the widget option -maptextfont.}
\attribute{mapinfo}{mapinfo}{Specifies the lines, texts, symbols and other
  various graphical components that should be displayed by the map item. All these
  graphical components will share the graphical attributes (color, font, etc) of
  the item and its coordinate system. The default value is {\tt ""} which means
  that nothing will be displayed by the map.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 1}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt false} as the item cannot handle events.}
\attribute{symbols}{bitmaplist}{}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Rectangle items}

\object{rectangle}

  Items of type \ident{rectangle} display a rectangular shape, optionally
  filled. The rectangle is described by its bottom-left and top-right corners.

  It is possible to use this item as a clip item for its group. It is also
  possible to use the rectangle in a \ident{contour} command to build a complex
  shape in a \ident{curve} item. The two points describing the rectangle
  can be read and modified with the \ident{coords} command.

  Applicable attributes for \ident{rectangle}:

\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{fillcolor}{gradientcolor}{Specifies the color that will be used to fill
  the rectangle if requested by the \ident{filled} attribute. The default value is a
  one color gradient based on the current value of the widget option \ident{-foreground}.}
\attribute{filled}{boolean}{Specifies if the item should be filled. The default
  value is {\tt false}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern to use when filling the
  item. The default value is {\tt ""}.}
\attribute{gradient}{gradientgeometry}{Specifies the type and geometry of the
  gradient that should be drawn to fill the item. This will be done only if filling is
  requested by the \ident{filled} attribute. The default value is {\tt ""} which means
  no gradient geometry, fill with solid color. When a value other than the default is
  specified, this attribute has priority over the \ident{tile} and \ident{fillpattern}
  attributes.}
\attribute{linecolor}{color}{Specifies the color that will be used to draw
  the item outline. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{linepattern}{bitmap}{Specifies the pattern to use when drawing the
  outline. The default value is {\tt ""}.}
\attribute{linestyle}{linestyle}{Specifies the line style to use when drawing
  the outline. The default value is {\tt simple}.}
\attribute{linewidth}{dimension}{Specifies the with of the item outline (not
  scalable). The default value is {\tt 1}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{relief}{relief}{Specifies the relief used to drawn the rectangle
  outline. This attribute has priority over the \ident{linecolor}, \ident{linepattern}
  and \ident{linestyle} attributes. The default value is {\tt flat}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{tile}{image}{Specifies an image used for filling the item with
  tiles. This will be done only if filling is requested by the \ident{filled} attribute.
  This attribute has priority over the \ident{gradient} attribute when no gradient is
  specified (paint solid) and the \ident{fillpattern} attribute. The default value is
  {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Arc items}

\object{arc}

  Items of type \ident{arc} display an oval section, optionally filled,
  delimited by two angles. The oval is described by its enclosing rectangle.
  The arc can be closed either by a straight line joining its end points
  or by two segments going throught the center to form a pie-slice.
  
  It is possible to use this item as a clip item for its group, the clip
  shape will be the polygon obtained by closing the arc. It is also possible
  to use this polygon in a \ident{contour} command to build a complex shape
  in a \ident{curve} item. The two points describing the enclosing rectangle
  can be read and modified with the \ident{coords} command.

  Applicable attributes for \ident{arc}:

\attribute{closed}{boolean}{Specifies if the outline of the arc should be
  closed. This is only pertinent if the arc extent is less than 360 degrees.
  The default value is {\tt false}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{extent}{angle}{Specifies the angular extent of the arc relative to the
  start angle. The angle is expressed in degrees in the trigonometric system. The
  default value is {\tt 360}.}
\attribute{fillcolor}{gradientcolor}{ Specifies the color that will be used to fill
  the arc if requested by the \ident{filled} attribute. The default value is a
  one color gradient based on the current value of the widget option
  \ident{-foreground}.}
\attribute{filled}{boolean}{Specifies if the item should be filled. The default
  value is {\tt false}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern to use when filling the
  item. The default value is {\tt ""}.}
\attribute{firstend}{lineend}{Describe the arrow shape at the start end of
  the arc. This attribute is applicable only if the item is not closed and not filled.
  The default value is {\tt ""}.}
\attribute{gradient}{gradientgeometry}{Specifies the type and geometry of the
  gradient that should be drawn to fill the item. This will be done only if filling is
  requested by the \ident{filled} attribute. The default value is {\tt ""} which means
  no gradient geometry, fill with solid color. When a value other than the default is
  specified, this attribute has priority over the \ident{tile} and \ident{fillpattern}
  attributes.}
\attribute{lastend}{lineend}{Describe the arrow shape at the extent end of
  the arc. This attribute is applicable only if the item is not closed and not filled.
  The default value is {\tt ""}.}
\attribute{linecolor}{color}{Specifies the color that will be used to draw
  the item outline. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{linepattern}{bitmap}{Specifies the pattern to use when drawing the
  outline. The default value is {\tt ""}.}
\attribute{linestyle}{linestyle}{Specifies the line style to use when drawing
  the outline. The default value is {\tt simple}.}
\attribute{linewidth}{dimension}{Specifies the with of the item outline (not
  scalable). The default value is {\tt 1}.}
\attribute{pieslice}{boolean}{This attribute tells how to draw an arc whose
  extent is less than 360 degrees. If this attribute is true the arc open end
  will be drawn as a pie slice otherwise it will be drawn as a chord. The default
  value is {\tt false}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{startangle}{angle}{Specifies the arc starting angle. The angle is
  expressed in degrees in the trigonometric system. The default value is {\tt 0}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{tile}{image}{Specifies an image used for filling the item with
  tiles. This will be done only if filling is requested by the \ident{filled} attribute.
  This attribute has priority over the \ident{gradient} attribute when no gradient is
  specified (paint solid) and the \ident{fillpattern} attribute. The default value is
  {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Curve items}

\object{curve}

  Items of type \ident{curve} display a path of line segments connected by their
  end points. It is possible to build curve items with more than one path
  to describe complex shapes with the \ident{contour} command. This command can be
  used to perform boolean operations between a curve and almost any other item
  available in \ident{zinc} including another curve. The polygon delimited by the
  path can optionally be filled.
  
  It is possible to use this item as a clip item for its group, the clip shape will
  be the polygon obtained by closing the path. The vertices can be read, modified,
  added or removed with the \ident{coords} command.

  Applicable attributes for \ident{curve}:

\attribute{capstyle}{capstyle}{Specifies the form of the outline ends. This
  attribute is only applicable if the curve is not closed and the outline relief is
  flat. The default value is {\tt round}.}
\attribute{closed}{boolean}{Specifies if the curve outline should be drawn
  between the first and last vertex or not. The default is {\tt true}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation
  should be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{fillcolor}{gradientcolor}{Specifies the color that will be used to fill
  the curve if requested by the \ident{filled} attribute. The default value is a
  one color gradient based on the current value of the widget option
  \ident{-foreground}.}
\attribute{filled}{boolean}{Specifies if the item should be filled. The default
  value is {\tt false}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern to use when filling the
  item. The default value is {\tt ""}.}
\attribute{firstend}{lineend}{Describe the arrow shape at the start of the curve.
  This attribute is applicable only if the item is not closed, not filled and
  the relief of the outline is flat. The default value is {\tt ""}.}
\attribute{gradient}{gradientgeometry}{Specifies the type and geometry of the
  gradient that should be drawn to fill the item. This will be done only if filling is
  requested by the \ident{filled} attribute. The default value is {\tt ""} which means
  no gradient geometry, fill with solid color. When a value other than the default is
  specified, this attribute has priority over the \ident{tile} and \ident{fillpattern}
  attributes.}
\attribute{joinstyle}{joinstyle}{Specifies the form of the joint between the curve
  segments. This attribute is only applicable if the curve outline relief is flat.
  The default value is {\tt round}.}
\attribute{lastend}{lineend}{Describe the arrow shape at the end of the curve.
  This attribute is applicable only if the item is not closed, not filled and
  the relief of the outline is flat. The default value is {\tt ""}.}
\attribute{linecolor}{color}{Specifies the color that will be used to draw
  the item outline. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{linepattern}{bitmap}{Specifies the pattern to use when drawing the
  outline. The default value is {\tt ""}.}
\attribute{linestyle}{linestyle}{Specifies the line style to use when drawing
  the outline. The default value is {\tt simple}.}
\attribute{linewidth}{dimension}{Specifies the with of the item outline (not
  scalable). The default value is {\tt 1}.}
\attribute{marker}{bitmap}{Specifies a bitmap that will be used to draw a mark at
  each vertex of the curve. This attribute is not applicable if the outline relief is
  not flat. The default value is {\tt ""} which means do not draw markers.}
\attribute{markercolor}{color}{Specifies the color of the markers.
  The default value is the current value of the widget option \ident{-foreground}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{relief}{relief}{Specifies the relief used to drawn the curve
  outline. This attribute has priority over the \ident{linecolor}, \ident{linepattern}
  and \ident{linestyle} attributes. The default value is {\tt flat}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{tile}{image}{Specifies an image used for filling the item with
  tiles. This will be done only if filling is requested by the \ident{filled} attribute.
  This attribute has priority over the \ident{gradient} attribute when no gradient is
  specified (paint solid) and the \ident{fillpattern} attribute. The default value is
  {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}


\section{Bezier items}

\object{bezier}

  Items of type \ident{bezier} display a path of Bezier cubic segments connected
  by their end points. Each segment is described by four control points, two
  located at the ends of the segment and two located off curve. The last segment
  can contain less than four points but at least two. If it contains two points
  a straight line segment is drawn, if it contains three points, the second
  point is used as the two off-curve control points. The polygon delimited by the
  path can optionally be filled.
  
  It is possible to use this item as a clip item for its group, the clip
  shape will be the polygon obtained by closing the path. It is also possible
  to use this polygon in a \ident{contour} command to build a complex shape
  in a \ident{curve} item. The controls points can be read, modified, added or
  removed with the \ident{coords} command.
  
Applicable attributes for \ident{bezier}:

\attribute{capstyle}{capstyle}{Specifies the form of the outline ends. This
  attribute is only applicable if the bezier is not closed and the outline relief is
  flat. The default value is {\tt round}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should be
  composed with the local transform. The default value is {\tt true}.}
\attribute{fillcolor}{gradientcolor}{Specifies the color that will be used to fill
  the bezier if requested by the \ident{filled} attribute. The default value is a
  one color gradient based on the current value of the widget option
  \ident{-foreground}.}
\attribute{filled}{boolean}{Specifies if the item should be filled. The default
  value is {\tt false}.}
\attribute{fillpattern}{bitmap}{Specifies the pattern to use when filling the
  item. The default value is {\tt ""}.}
\attribute{firstend}{lineend}{Describe the arrow shape at the start of the bezier.
  This attribute is applicable only if the item is not filled and the relief of the
  outline is flat. The default value is {\tt ""}.}
\attribute{gradient}{gradientgeometry}{Specifies the type and geometry of the
  gradient that should be drawn to fill the item. This will be done only if filling is
  requested by the \ident{filled} attribute. The default value is {\tt ""} which means
  no gradient geometry, fill with solid color. When a value other than the default is
  specified, this attribute has priority over the \ident{tile} and \ident{fillpattern}
  attributes.}
\attribute{lastend}{lineend}{Describe the arrow shape at the end of the bezier.
  This attribute is applicable only if the item is not filled and the relief of the
  outline is flat. The default value is {\tt ""}.}
\attribute{linecolor}{color}{Specifies the color that will be used to draw
  the item outline. The default value is the current value of the widget option
  \ident{-foreground}.}
\attribute{linepattern}{bitmap}{Specifies the pattern to use when drawing the
  outline. The default value is {\tt ""}.}
\attribute{linestyle}{linestyle}{Specifies the line style to use when drawing
  the outline. The default value is {\tt simple}.}
\attribute{linewidth}{dimension}{Specifies the with of the item outline (not
  scalable). The default value is {\tt 1}.}
\attribute{priority}{integer}{The absolute position in the stacking order among
  siblings of the same parent group. The default value is {\tt 2}.}
\attribute{relief}{relief}{Specifies the relief used to drawn the bezier
  outline. This attribute has priority over the \ident{linecolor}, \ident{linepattern}
  and \ident{linestyle} attributes. The default value is {\tt flat}.}
\attribute{sensitive}{boolean}{Specifies if the item should react to events.
  The default value is {\tt true}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{tile}{image}{Specifies an image used for filling the item with
  tiles. This will be done only if filling is requested by the \ident{filled} attribute.
  This attribute has priority over the \ident{gradient} attribute when no gradient is
  specified (paint solid) and the \ident{fillpattern} attribute. The default value is
  {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}



\section{Window items}
\object{window}

  Items of type \ident{window} display an X11 window at a given position in the
  widget.

  It is possible to use this item as a clip item for its group, the clip
  shape will be the window rectangle. It is also possible to use the rectangular
  shape of the window item in a \ident{contour} command to build a complex shape
  in a \ident{curve} item. The position of the window, relative to the anchor,
  can be set or read with the \ident{coords} command (i.e. if no connected item
  is specified).

  One of the most frequent use of this item is to embed any Tk widget
  into zinc, including, of course, another zinc instance. Another less obvious
  use is to embed a whole Tk application into zinc, here is how to do it:
  The embedding application should create a frame with the \ident{-container}
  option set to true; Add a window item to the relevant zinc widget with the
  \ident{window} attribute set to the id of the container frame; The embedded
  application should create its toplevel with the \ident{-use} option set to
  the id of the container frame; Or, as an alternative, the embedded \cident{wish}
  can be launched with the \ident{-use} option set to the container frame id.
  
Applicable attributes for \ident{window}:

\attribute{anchor}{anchor}{The anchor used in positionning the item.
  The default value is {\tt nw}.}
\attribute{composerotation}{boolean}{Specifies if the current rotation
  should be composed with the local transform. The default value is {\tt true}.}
\attribute{composescale}{boolean}{Specifies if the current scale should
  be composed with the local transform. The default value is {\tt true}.}
\attribute{connecteditem}{item}{Specifies the item relative to which this
  item is placed. The default value is {\tt ""}.}
\attribute{connectionanchor}{anchor}{Specifies the anchor on the connected
  item used for the placement. The default value is {\tt sw}.}
\attribute{height}{dimension}{Specifies the height of the item window in
  screen units. The default value is {\tt 0}.}
\attribute{position}{position}{The item's position relative to the anchor
  (if no connected item specified). The default value is {\tt "0 0"}.}
\attribute{priority}{integer}{Constraints of the underlying window sytem
  dictate the stacking order of window items. They can't be lowered under the
  other items. Additionally, to manipulate their stacking order, you must use
  the raise and lower Tk commands on the associated Tk window. The value of this
  attribute is meaningless.}
\attribute{sensitive}{boolean}{This option has no effect on window items.
  The default value is {\tt False}.}
\attribute{tags}{taglist}{The list of tags associated with the item. The default
  value is {\tt ""}.}
\attribute{visible}{boolean}{Specifies if the item is displayed. The default
  value is {\tt true}.}
\attribute{width}{dimension}{Specifies the width of the item window in
  screen units. The default value is {\tt 0}.}
\attribute{window}{window}{Specifies the X id of the window that is displayed
  by the item. This id can be obtained by the Tk command \ident{winfo id widgetname}.
  The default value is {\tt ""}.}


\chapter{The \ident{mapinfo} command}
\label{mapinfocmd}

  MapInfo objects are used to describe graphical primitives that will be
  displayed in map items. It is possible to describe lines, arcs, symbols
  and texts as part of a MapInfo. The \ident{mapinfo} and \ident{videomap}
  commands are provided to create and manipulate the mapinfo objects.
  
\mapinfocmd{name}{create}{}
\begin{blockindent}
  Create a new empty map description. The new mapinfo object named {\tt name}.
\end{blockindent}

\mapinfocmd{mapInfoName}{delete}{}
\begin{blockindent}
  Delete the mapinfo object named by {\tt mapInfoName}. All maps that refer to
  the deleted mapinfo are updated to reflect the change.
\end{blockindent}

\mapinfocmd{mapInfoName}{duplicate}{newName}
\begin{blockindent}
  Create a new mapinfo that is a exact copy of the mapinfo named {\tt mapInfoName}.
  The new mapinfo object will be named {\tt newName}.
\end{blockindent}

\mapinfocmd{name}{add}{type args}
\begin{blockindent}
  Add a new graphical element to the mapinfo object named by {\tt name}. The
  {\tt type} parameter select which element should be added while the {\tt args}
  arguments provide some type specific values such as coordinates. Here is
  a description of recognized types and their associated parameters.
  
  \begin{description}
  \item{line} \\
    This element describes a line segment. Its parameters consists in a line
    style ({\tt simple}, {\tt dashed}, {\tt dotted}, {\tt mixed}, {\tt marked}),
    an integer value setting the line width in pixels and four integer values
    setting the X and Y coordinates of the two end vertices.
  \item{arc} \\
    This element describes an arc segment. Its parameters consists in a line
    style ({\tt simple}, {\tt dashed}, {\tt dotted}, {\tt mixed}, {\tt marked}),
    an integer value setting the line width in pixels, two integer values
    setting the X and Y of the arc center, integer value setting the arc radius
    and two integer values setting the start angle and the angular extent of the
    arc.
  \item{symbol} \\
    This element describes a symbol. Its parameters consists in two integer values
    setting the X and Y of the symbol position and an integer setting the symbol
    index in the {\tt -symbols} list of the map item.
  \item{text} \\
    This element describes a line of text. Its parameters consists in a text style
    ({\tt normal}, {\tt underlined}), a line style ({\tt simple}, {\tt dashed},
    {\tt dotted}, {\tt mixed}, {\tt marked}) to be used for the underline, two
    integer values setting the X and Y of the text position and a string describing
    the text.
  \end {description}
  
\end{blockindent}

\mapinfocmd{name}{count}{type}
\begin{blockindent}
  Return an integer value that is the number of elements matching {\tt type} in
  the mapinfo named {\tt name}. {\tt type} may be one the legal element types as
  described in the {\tt mapinfo add} command.
\end{blockindent}

\mapinfocmd{name}{get}{type index}
\begin{blockindent}
  Return the parameters of the element at {\tt index} with type {\tt type}
  in the mapinfo named {\tt name}. The returned value is a list. The exact
  number of parameters in the list and their meaning depend on {\tt type}
  and is accurately described in \ident{mapinfo add}. {\tt type} may be one
  the legal element types as described in the {\tt mapinfo add} command.
  Indices are zero based and elements are listed by type.
\end{blockindent}

\mapinfocmd{name}{replace}{type index args}
\begin{blockindent}
  Replace all parameters for the element at {\tt index} with type {\tt type}
  in the mapinfo named {\tt name}. The exact number and content for {\tt args}
  depend on {\tt type} and is accurately described in \ident{mapinfo add}.
  {\tt type} may be one the legal element types as described in the
  {\tt mapinfo add} command. Indices are zero based and elements are listed
  by type.
\end{blockindent}

\mapinfocmd{name}{remove}{type index}
\begin{blockindent}
  Remove the element at {\tt index} with type {\tt type} in the mapinfo
  named {\tt name}. {\tt type} may be one the legal element types as
  described in the {\tt mapinfo add} command. Indices are zero based and
  elements are listed by type.
\end{blockindent}

\mapinfocmd{name}{scale}{factor}
\begin{blockindent}
  Scale all coordinates of all the elements described in the mapinfo named
  {\tt name} by {\tt factor}. The same value is used for X and Y axes.
\end{blockindent}

\mapinfocmd{name}{translate}{xAmount yAmount}
\begin{blockindent}
  Translate all coordinates of all the elements described in the mapinfo named
  {\tt name}. The {\tt xAmount} value is used for the X axis and the
  {\tt yAmount} value is used for the Y axis.
\end{blockindent}



\chapter{The \ident{videomap} command}

\command{videomap}{ids}{fileName}
\begin{blockindent}
  Return all sub-map ids that are described in the videomap file described
  by {\tt fileName}. The ids are listed in file order. This command makes
  possible to iterate through a videomap file one sub-map at a time, to know
  how much sub-maps are there and to sort them according to their ids.
\end{blockindent}

\command{videomap}{load}{fileName index mapInfoName}
\begin{blockindent}
  Load the videomap sub-map located at position {\tt index} in the file named
  {\tt fileName} into a mapinfo object named {\tt mapInfoName}. It is possible,
  if needed, to use the \ident{videomap ids} command to help translate a sub-map
  id into a sub-map file index.
\end{blockindent}



\chapter{Other resources provided by the widget}

\section{Bitmaps}
\label{builtinbitmaps}

Zinc creates two sets of bitmaps.

The first set contains symbols for ATC tracks, maps and
waypoints, these bitmaps are named AtcSymbol1 to AtcSymbol22.

\latexhtml{%
  \includegraphics{atcsymb.ps}}{%
  \htmladdimg{atcsymb.png}
  }

The second set provides stipples that can be used to implement
transparency, they are named AlphaStipple0 to AlphaStipple15,
AlphaStipple0 being the most transparent.

\latexhtml{%
  \includegraphics{alphastip.ps}}{%
  \htmladdimg{alphastip.png}
  }

\latex {\tolerance 2000                 %allow somewhat looser lines.
  \hbadness 10000 }                 %don't complain about underfull lines.

\tableofcontents
\listoftables
\listoffigures

\printindex

\label{interne:DernierePage}


\end{document}